HDS 7 Gen1 - Elite 7 Gen1 (non-chirp)

Moderator: Ken Sauret

Post Reply
User avatar
Lugnut
Posts: 1068
Joined: Fri May 20, 2005 7:04 pm
Location: Turlock, Ca.
Contact:
Contact Lugnut

HDS 7 Gen1 - Elite 7 Gen1 (non-chirp)

Post by Lugnut »

Can these two units (HDS 7 Gen1 - Elite 7 Gen1 (non-chirp)) be linked together with a NMEA cable to share way points? Thank You for the information
Don't ask about my username, all I need to say is check yours and check them often.

HomeBrew Tackle Co.
Top
NoCAL
Posts: 541
Joined: Tue Nov 15, 2005 5:20 pm
Location: Woodland, CA

Re: HDS 7 Gen1 - Elite 7 Gen1 (non-chirp)

Post by NoCAL »

If you correctly set up a NMEA network, both these units can be connected to it and share waypoints. There is no waypoint sync and no editing of waypoints on one unit and seeing the changes on the other. Each unit must be on for the waypoint to share.

NoCAL
Top
User avatar
Lugnut
Posts: 1068
Joined: Fri May 20, 2005 7:04 pm
Location: Turlock, Ca.
Contact:
Contact Lugnut

Re: HDS 7 Gen1 - Elite 7 Gen1 (non-chirp)

Post by Lugnut »

Thanks
Don't ask about my username, all I need to say is check yours and check them often.

HomeBrew Tackle Co.
Top
Post Reply

Return to “Electronics Product Forum”