Prop tuning shop for Yamaha

Moderators: ash, Mike M, Caudawg, Cooch

Kentuck
Posts: 299
Joined: Sun May 08, 2005 1:49 pm

Prop tuning shop for Yamaha

Postby Kentuck » Wed Feb 15, 2017 9:24 pm

Tore a prop up and had to put a new one on. Same model and pitch.
Took the boat out and it loses grip just as it comes on pad. I believe this is called cavitation. Also, I used to run around at 4900 rpms, but if I do that now it sounds like the motor is going to blow up from runs too high.
I've been told I need to have the prop "tuned". Any recommendations on a shop in near the Concord area?

hydro
Posts: 250
Joined: Sun Jun 05, 2005 7:35 am

Re: Prop tuning shop for Yamaha

Postby hydro » Fri Feb 17, 2017 6:05 am

Some props use a rubber shock hub to prevent damage to the prop when striking a hard object . Sounds like you've spun your hub and need a new one installed on your prop . Any Yamaha dealer or Prop shop can fix this problem .

TonyM
Posts: 125
Joined: Tue May 31, 2005 3:13 pm

Re: Prop tuning shop for Yamaha

Postby TonyM » Fri Feb 17, 2017 7:45 am

Yup...classic symptoms of a spun hub.

zdbm2004
Posts: 112
Joined: Mon Nov 15, 2010 1:30 pm

Re: Prop tuning shop for Yamaha

Postby zdbm2004 » Fri Feb 17, 2017 11:38 am

Johns propeller welding and tuning service in Vallejo on Benicia Rd. I've never done any business there but met people who have. Also check and see if the new prop you out on has vents and it they have or don't have plugs in the vent holes. Lots of boats this makes a huge difference.
zmyers

Kentuck
Posts: 299
Joined: Sun May 08, 2005 1:49 pm

Re: Prop tuning shop for Yamaha

Postby Kentuck » Fri Feb 17, 2017 2:56 pm

zdbm2004 wrote:Johns propeller welding and tuning service in Vallejo on Benicia Rd. I've never done any business there but met people who have. Also check and see if the new prop you out on has vents and it they have or don't have plugs in the vent holes. Lots of boats this makes a huge difference.


This is what I've been told I need to do. Two people have told me I am getting too much "air" through the prop.

hydro
Posts: 250
Joined: Sun Jun 05, 2005 7:35 am

Re: Prop tuning shop for Yamaha

Postby hydro » Fri Feb 17, 2017 5:27 pm

Kentuck , Those vent holes in a prop are there to allow a higher pitched prop to cavitate (slip) to get you up on plane during a hole shot . After your boats on pad and underway those vent holes have a minimal effect due to the flow of water across the prop hub . With the symptoms you described it sure sounds like a spun hub to me but take it to a shop and see what they say .

TonyM
Posts: 125
Joined: Tue May 31, 2005 3:13 pm

Re: Prop tuning shop for Yamaha

Postby TonyM » Fri Feb 17, 2017 7:18 pm

Kentuck-You said its the same model prop and pitch you were running before. Assuming you plugged them the same (if they even have vent holes), it still sounds like a spun hub hub to me. Either way, should be an easy fix. Good luck.

Kentuck
Posts: 299
Joined: Sun May 08, 2005 1:49 pm

Re: Prop tuning shop for Yamaha

Postby Kentuck » Fri Feb 17, 2017 9:55 pm

Thanks all. I will have the prop checked. Seems odd to have a brand new prop with a spun hub but I guess you never know.


Return to “Fishing”

Who is online

Users browsing this forum: 2nd Basshole, bassfreak111, Sparky6, steve0806 and 39 guests