Sharing Trails? and update

Moderator: Ken Sauret

Post Reply
User avatar
Morgan
Posts: 401
Joined: Sat May 07, 2005 5:48 am
Location: Madera
Contact:

Sharing Trails? and update

Post by Morgan »

Ken/Edd, I have 2 HDS Gen3 12s connected together with both NMEA2k and Ethernet. They share waypoints, temp, and charts fine, but don't share trails. I only have 2 trails on the bow unit but I have 28 on the console unit (which is correct). Do the networks not share trails?

2nd question: After the last update, I now have 2 tabs on the left side of the console graph only: one that says 'Mercury' and the other that says 'vessel Control'. I don't have a Mercury and don't need the other. How do I get rid of these?

Thanks a bunch,
Morgan
NoCAL
Posts: 541
Joined: Tue Nov 15, 2005 5:20 pm
Location: Woodland, CA

Re: Sharing Trails? and update

Post by NoCAL »

Trails are not shared over either network.
User avatar
Edd
Posts: 308
Joined: Thu Jan 21, 2016 1:08 pm

Re: Sharing Trails? and update

Post by Edd »

NoCal is right. Can you text me a pic of your 2nd question? 559-916-9145

Edd
User avatar
Morgan
Posts: 401
Joined: Sat May 07, 2005 5:48 am
Location: Madera
Contact:

Re: Sharing Trails? and update

Post by Morgan »

Hey Edd, Here is the pic of the added tabs on the left side. The update didn't put these on the bow graph, just the console.

Morgan
Attachments
shot001.jpg
NoCAL
Posts: 541
Joined: Tue Nov 15, 2005 5:20 pm
Location: Woodland, CA

Re: Sharing Trails? and update

Post by NoCAL »

Pretty sure those were added with the previous update to allow integration with an autopilot and Mercury VesselView. Are you sure you updated with the 4.5 update? It could be that they have to be turned off in the Advanced menu as well. There was a big discussion about it at BBC but I could swear it was for the earlier update.

NoCAL
User avatar
Morgan
Posts: 401
Joined: Sat May 07, 2005 5:48 am
Location: Madera
Contact:

Re: Sharing Trails? and update

Post by Morgan »

Yep, I checked the updates and have the latest 4.5. I've been searching in the menus but havn't found out how to remove it yet.

Morgan
User avatar
Edd
Posts: 308
Joined: Thu Jan 21, 2016 1:08 pm

Re: Sharing Trails? and update

Post by Edd »

Morgan,
Power button
Settings
System
Advanced.
Look under Features
User avatar
Morgan
Posts: 401
Joined: Sat May 07, 2005 5:48 am
Location: Madera
Contact:

Re: Sharing Trails? and update

Post by Morgan »

Edd, Here are the screenshots of Features. Still couldn't find it. I also checked the other ones. Any other ideas?

Morgan
Attachments
shot003.jpg
shot002.jpg
User avatar
Edd
Posts: 308
Joined: Thu Jan 21, 2016 1:08 pm

Re: Sharing Trails? and update

Post by Edd »

Morgan give me a call from your boat. 559-916-9145
Post Reply