Sharing Trails? and update

Moderators: Cooch, ash, Mike M, Caudawg, Ken Sauret

User avatar
Morgan
Posts: 355
Joined: Sat May 07, 2005 5:48 am
Location: Madera
Contact:

Sharing Trails? and update

Postby Morgan » Mon May 08, 2017 11:56 am

Ken/Edd, I have 2 HDS Gen3 12s connected together with both NMEA2k and Ethernet. They share waypoints, temp, and charts fine, but don't share trails. I only have 2 trails on the bow unit but I have 28 on the console unit (which is correct). Do the networks not share trails?

2nd question: After the last update, I now have 2 tabs on the left side of the console graph only: one that says 'Mercury' and the other that says 'vessel Control'. I don't have a Mercury and don't need the other. How do I get rid of these?

Thanks a bunch,
Morgan

NoCAL
Posts: 515
Joined: Tue Nov 15, 2005 5:20 pm
Location: Woodland, CA

Re: Sharing Trails? and update

Postby NoCAL » Mon May 08, 2017 2:30 pm

Trails are not shared over either network.

User avatar
Edd
Posts: 175
Joined: Thu Jan 21, 2016 1:08 pm

Re: Sharing Trails? and update

Postby Edd » Mon May 08, 2017 5:46 pm

NoCal is right. Can you text me a pic of your 2nd question? 559-916-9145

Edd
Pro-Staff: Lowrance Electronics
Pro-Staff: Scotty Fishing Products
Pro-Staff: Mack's Lure/Shasta Tackle
Pro-Staff: SHARK Cannonballs
Pro-Staff: Water Wolf HD Cameras
Ambassador for Pro Cure Bait Scents

User avatar
Morgan
Posts: 355
Joined: Sat May 07, 2005 5:48 am
Location: Madera
Contact:

Re: Sharing Trails? and update

Postby Morgan » Tue May 09, 2017 7:45 am

Hey Edd, Here is the pic of the added tabs on the left side. The update didn't put these on the bow graph, just the console.

Morgan
Attachments
shot001.jpg

NoCAL
Posts: 515
Joined: Tue Nov 15, 2005 5:20 pm
Location: Woodland, CA

Re: Sharing Trails? and update

Postby NoCAL » Tue May 09, 2017 10:32 am

Pretty sure those were added with the previous update to allow integration with an autopilot and Mercury VesselView. Are you sure you updated with the 4.5 update? It could be that they have to be turned off in the Advanced menu as well. There was a big discussion about it at BBC but I could swear it was for the earlier update.

NoCAL

User avatar
Morgan
Posts: 355
Joined: Sat May 07, 2005 5:48 am
Location: Madera
Contact:

Re: Sharing Trails? and update

Postby Morgan » Tue May 09, 2017 11:26 am

Yep, I checked the updates and have the latest 4.5. I've been searching in the menus but havn't found out how to remove it yet.

Morgan

User avatar
Edd
Posts: 175
Joined: Thu Jan 21, 2016 1:08 pm

Re: Sharing Trails? and update

Postby Edd » Tue May 09, 2017 5:37 pm

Morgan,
Power button
Settings
System
Advanced.
Look under Features
Pro-Staff: Lowrance Electronics
Pro-Staff: Scotty Fishing Products
Pro-Staff: Mack's Lure/Shasta Tackle
Pro-Staff: SHARK Cannonballs
Pro-Staff: Water Wolf HD Cameras
Ambassador for Pro Cure Bait Scents

User avatar
Morgan
Posts: 355
Joined: Sat May 07, 2005 5:48 am
Location: Madera
Contact:

Re: Sharing Trails? and update

Postby Morgan » Wed May 10, 2017 6:35 am

Edd, Here are the screenshots of Features. Still couldn't find it. I also checked the other ones. Any other ideas?

Morgan
Attachments
shot003.jpg
shot002.jpg

User avatar
Edd
Posts: 175
Joined: Thu Jan 21, 2016 1:08 pm

Re: Sharing Trails? and update

Postby Edd » Wed May 10, 2017 6:57 am

Morgan give me a call from your boat. 559-916-9145
Pro-Staff: Lowrance Electronics
Pro-Staff: Scotty Fishing Products
Pro-Staff: Mack's Lure/Shasta Tackle
Pro-Staff: SHARK Cannonballs
Pro-Staff: Water Wolf HD Cameras
Ambassador for Pro Cure Bait Scents


Return to “Lowrance Product Forum”

Who is online

Users browsing this forum: No registered users and 2 guests