total scan transducer mounting

Moderator: Ken Sauret

Post Reply
Bass boy dave
Posts: 76
Joined: Tue Dec 27, 2016 7:42 pm

total scan transducer mounting

Post by Bass boy dave »

im upgrading my units with the hds 12 gen 3. has anyone mounted the total scan transducer to the underside of their hydraulic jack plate. it has a nice big plate between the transom and the motor that would be perfect, just worried if I will get interference from the out board. looks like I have plenty of room. thank you
Ken Sauret
Posts: 776
Joined: Sun Oct 18, 2009 7:39 pm
Location: Paso Robles California
Contact:

Re: total scan transducer mounting

Post by Ken Sauret »

There should be not interference from the big motor. When you mount the transducer, be sure that there are no obstructions on either side of the transducer. For example, if when you trim the big motor all the way down, make sure it does not block any of the view to the side of the ducer.
Ken Sauret
Lowrance Pro Staff
Lowrance http://www.lowrance.com/
Yamamoto https://store.baits.com/home
Dobyns Rods http://www.dobynsrods.com/
Yamaha http://www.yamaha-motor.com/
Personal Web Site http://kensbassfishing.weebly.com/
Bass boy dave
Posts: 76
Joined: Tue Dec 27, 2016 7:42 pm

Re: total scan transducer mounting

Post by Bass boy dave »

thank you
User avatar
Edd
Posts: 308
Joined: Thu Jan 21, 2016 1:08 pm

Re: total scan transducer mounting

Post by Edd »

You said TotalScan......is your jackplate in the water when you are on pad?
Bass boy dave
Posts: 76
Joined: Tue Dec 27, 2016 7:42 pm

Re: total scan transducer mounting

Post by Bass boy dave »

to the best of my knowledge edd. I used the mounting hardware included in my boat in box kit. it sits about level with the pad or a hair lower once mounted. took it out last Sunday but didn't know I had to activate the transducer couldn't check if it worked or not.
User avatar
Edd
Posts: 308
Joined: Thu Jan 21, 2016 1:08 pm

Re: total scan transducer mounting

Post by Edd »

That's great but, if you find yourself losing bottom at speed, you might want to try one of the wedges from Transducer Shield and Saver. Mount it between the transducer and the plate.

What do you mean by 'activate' the transducer?
Bass boy dave
Posts: 76
Joined: Tue Dec 27, 2016 7:42 pm

Re: total scan transducer mounting

Post by Bass boy dave »

when I was at the pages screen and touched the sonar or structure icon the menu would come up. I had water temp but no depth or image of sonar or structure. I went to lowrance online when I got home and watched the set up video. says I have to go to settings and tell the hds what transducer the boat has. I haven't figured out the name I am suppose to use on the menu yet because its not labeled like the box unless I missed it. I haven't done any updates either was planning on trying tonight. if you recommend a adapter or pad I think I will order that as well. my ranger has a bobs jack plate and is quite bigger than a atlas so I have room on the plate between the transom and outboard.
User avatar
Edd
Posts: 308
Joined: Thu Jan 21, 2016 1:08 pm

Re: total scan transducer mounting

Post by Edd »

The TotalScan transducer should be in the list of transducers. I wouldn't order the wedge until you get everything dialed in.
Bass boy dave
Posts: 76
Joined: Tue Dec 27, 2016 7:42 pm

Re: total scan transducer mounting

Post by Bass boy dave »

thanks edd always a help to every one. I really appreciate it.
drew
Posts: 1112
Joined: Thu Apr 12, 2007 1:30 pm

Re: total scan transducer mounting

Post by drew »

It should auto recognize the totalscan. If not it is listed in the list of transducers. I made a the mount below for mine.
Image
Bass boy dave wrote:when I was at the pages screen and touched the sonar or structure icon the menu would come up. I had water temp but no depth or image of sonar or structure. I went to lowrance online when I got home and watched the set up video. says I have to go to settings and tell the hds what transducer the boat has. I haven't figured out the name I am suppose to use on the menu yet because its not labeled like the box unless I missed it. I haven't done any updates either was planning on trying tonight. if you recommend a adapter or pad I think I will order that as well. my ranger has a bobs jack plate and is quite bigger than a atlas so I have room on the plate between the transom and outboard.
Last edited by drew on Thu Oct 26, 2017 8:03 am, edited 2 times in total.
Bass boy dave
Posts: 76
Joined: Tue Dec 27, 2016 7:42 pm

Re: total scan transducer mounting

Post by Bass boy dave »

wow... very nice
Post Reply