Shout out to Jeremy at C&C Marine

Moderators: ash, Mike M, Caudawg, Cooch

R620
Posts: 1
Joined: Sat Feb 03, 2018 1:48 pm

Shout out to Jeremy at C&C Marine

Postby R620 » Sat Feb 03, 2018 2:56 pm

Justed wanted to give a big THANK YOU to Jeremy and his crew at C&C Marine in Citrus Heights! I had another mechanic work on my Yamaha for hourly maintenance. Engine was running rough after this maintenance so I took it back to the same mechanic. After they had the boat for a couple of weeks I was told it might require injector replacement and that it wouldn’t be covered under warranty (boat had less than 25 hrs). I was told to run injector cleaner through it and hope this was all it needed. Boat still ran rough... I then remembered reading here on this forum about a mechanic named Jeremy at C&C. Brought my boat to him in the morning he said if you can stay in the area I’ll let you know soon if it could be an easy fix. Well, less than an hour later he calls and said he found and corrected the problem. I pick up my boat and ask what do I owe? He said don’t worry about it just pay for the plug he replaced. Thanks again Jeremy, you’ve earned my business from here on!

ILW
Posts: 155
Joined: Fri Aug 12, 2011 12:32 pm

Re: Shout out to Jeremy at C&C Marine

Postby ILW » Sat Feb 03, 2018 4:56 pm

+1 on Jeremy always helping out at C&C!

fishfan
Posts: 381
Joined: Thu Feb 02, 2006 5:29 pm
Location: Chico,Ca

Re: Shout out to Jeremy at C&C Marine

Postby fishfan » Sat Feb 03, 2018 6:25 pm

+2 on Jeremy. Great guy!
I now know why it is called fishing and not catching!
The Sweetest Rods Ever !!! DOBYNS
www.westsidebass.com
Team LL

620 Dude
Posts: 44
Joined: Thu Nov 27, 2008 8:55 am
Location: Woodpile 95695

Re: Shout out to Jeremy at C&C Marine

Postby 620 Dude » Mon Feb 05, 2018 8:46 am

He's taken care of my Ranger 620 for the last ten years ...he's the best no bull

monte300
Posts: 133
Joined: Thu Mar 02, 2017 12:18 pm

Re: Shout out to Jeremy at C&C Marine

Postby monte300 » Mon Feb 05, 2018 9:32 am

Today's lesson, not all marine mechanics are created equal. I had to take my boat to Boatmasters the one time I didn't use them to get it right because someone else F'ed up my trailer.


Return to “Fishing”

Who is online

Users browsing this forum: Devon8604, ElGuapo, JCS, Spartan and 33 guests