6 steps for a Visual Inspection of PFD

Post Reply
WB Staff
Posts: 12582
Joined: Thu Jan 26, 2012 10:56 am

6 steps for a Visual Inspection of PFD

Post by WB Staff »

... Mustang Survival recommends a visual inspection before every use to check that:
1. There are no rips, tears, excessive abrasion or holes; all seams are securely sewn; and the cover, straps and hardware are still strong
2. Oral-inflation dust cap is in the stowed position
3. The PFD is not twisted
4. All zippers, closures and waist buckle are secure
5. Inflator status indicator is green. Some PFDs have more than one status indicator. Refer to product manual if you’re not sure
6. The inflator pull-tab is hanging on the outside...

Read it all: http://www.westernbass.com/article/pfd- ... g-survival
Post Reply