Bass Fishing Forum - Westernbass.com

edge

If anyone is looking to sell their Shimano Chornarch D7's, please shoot me a message!

edge

Smallies round my parts are mainly crushing spinnerbaits burned as fast as the 7:1 can turn. Having a hard time finding blades that will work specifically for this. 3/4 to 1 oz work best. Any suggestions?

edge

I am looking at a new cranking battery to run my Merc 175EFI and all my electronics and a new pair of trolling motor batteries for my MK Maxxum Pro 84lb.

What is the best AGM battery out there for the money?

edge

IM sent.

edge

If any anglers on the PRO side fish soft-plastic swimbaits for smallmouth with success, please shoot me a PM. Working on an article and could use your insights.

edge

I am fishing 5 and 6 inch swimbaits and just getting into it.

What hooks do you prefer. Brand, size, and weight are greatly appreciated.

Throwing mostly Yum sb's.

edge

My last issue that I remember is the one with Gabe Bolivar on the cover...correct?

edge

I run a 1998 175 EFI Merc and all the buzz is about using these products.

What are the benefits? Could they possibly harm the engine in any way?

How often do you use it?

Looking forward to your input.

edge

I am curious for those of you who fish this rod, do I really need to go to an 853 for T-Rigs? When I pitched worms and jigs, I usually like the same action so I do not have to adjust when picking up another rod. I noticed the 853 has a faster tip. I am pitching 1/4 to 3/4 oz baits. Looking forward t...

edge

I've been using 12lb Berkley 100% fluorocarbon and love it. Great stuff. VERY abrasion resistant and extremely sensitive.

edge

I just cleaned up an older Calcutta....and all I can say is WOW!!!. I stripped it down...cleaned it up and lubed with Xtreme Reel...this reel paired with an Elias Sig series rod is a rocket launcher for my DD22's...

What an amazing lubricant....phenomenal...and then some!

edge

Great input!

I will be pairing the rods with Chronarch MG's. What line are you running on your jig rod?

edge

As much as I would love to try a Dobyn's rod, there are none to be located where I live here in Canada. I am going to upgrade my GL3 to either of the rods above. I am looking at an IMX MBR 844 or the BCR 854. Mind you...I do not have to fish tules like you do but mostly weeds, pads, and trees. Aside...

edge

My pitching sticks have always been G-Loomis GL3 MBR 844's and I love the action to them. But, I am lacking in sensitivity. What rods do you all recommend for jigs/t-rigs? Do not want to spend more than $170 per rod. Looking forward to your input. Have heard lots of great things about the Dobyns rod...

edge

I just went to the tackletour.com review of fluorocarbons and it left me with a lot of questions.

I am curious what everyone uses for their spinning rods and baitcasters. Of course price is a factor but so is quality.

Your thoughts are appreciated.

edge

I filled up my batteries like I was supposed to with distilled water. They are 2 month old Trojans. Water had really evaporated. Stupid me, didn't charge them before I filled them and water expanded and spilled out. They water expanded during use with the trolling motor, not during the charge. I los...

edge

I use Berkley Gulp on everything in crawfish. I especially spray my frogs...they slide over the slop better and the fish never seem to let go.

I like the old Berkley scent as well in the squeeze bottle. A lot more chunky and seem to hold on to the bait longer.

edge

I love my Gander Mountain H20 Guidewear. Really comfortable, breathable, Gore-Tex, ....just awesome pants and bibs for a very affordable price.

edge

VInce,

Check your PM's.

edge

I saw that there is Extreme Reel Plus and Extreme Gear Plus. Am I correct that Reel Plus is for the bearings and line roller and spool shaft and the Gear plus is for the gears inside?

edge

I always unplug the connector for the antenna...I learned that lesson the hard way!

I did buy a battery switch to turn of power to all batteries when not in use but have not had the time to install it.

edge

I fish Chronarch MG's and Stradics. What reel lube do you all recommend?

Are ceramic bearings worth it when you factor in the cost?

Please mention sources for the materials you recommend so I don't have to search the net to find them!

edge

Guys,

I went with the Trojan SM1100...great cranking battery. Tonnes of juice and reliable.

I got SCS 225's for the trolling motor and they have more than enough for a day in the slop.

edge

If anything, when I pulled back on the throttle, I might have panicked and popped it in reverse for a second or two.

edge

Do you know if fly wheels are costly?

edge

I have a 1998 175 EFI. The other day I had to come down off plane and pull down off the throttle quick to avoid a deer. I heard a grinding noise when I did it. I popped the hood and saw the fly wheel (?) mounted horizontally had about 8 teeth that had been nicked. The point of each tooth is there bu...

edge

Thanks for the suggestion...I went to heavycover.com but they only list up to 3/4. I emailed and requested the 1 oz. so I'll have to wait and see.

Keep the suggestions coming...I'm finding some great baits and our smallie feed bag is just turning on for fall.

edge

Ben...you are correct. They were Ledgebusters and I've been looking for those too. I'm looking more for the 1-oz spinnerbaits for burning over flats and bait schools to get the smallies.

A lot of good baits have been mentioned though!

edge

I really need on-line sources...please!!!!!

edge

I have been hearing similar comments as well. Yet tire retailers advised me against putting a vehicle tire on a trailer. I heard that one boat company installs vehicle tires on their trailers with the purchase of a new boat....go figure.

edge

I am looking for 1 oz spinnerbaits. Does anyone know who carries them and particular brands? I saw Nichols makes a 1.5 but I'd prefer 1 oz.

edge

Scott, believe it or not, the Marathons are the best tires I could find...I'll know better for next time!

I happened to pass by the dealer again after I posted this. Believe it or not, he replaced the tires and they are impressive by my standards. So far so good...thanks for the input guys!

edge

I just purchased a new set of Good Year Marathon tires for my Ranger Fisherman trailer. While they were supposed to be inflated to 50 p.s.i., the dealer never checked and the tires arrived at the dealer with only 30 p.s.i.. I wasn't until I towed my boat out of the marina that I noticed the tires sa...

edge

I am using a Group 31 deep cycle GNB deep cycle 1000 cranking amp to start my boat. I have eliminated almost every opportunity of a short being present but she keeps dying in between outings.

What does everyone recommend for a cranking battery for a 175 EFI?

Thanks,
Jonathan

edge

I'm not looking for Hot Maps! I'm looking for the maps the touring pros are using when scouting our bodies of water. Thanks for the suggestion about Bass Pro!

edge

I am looking for quality hydrographic maps for the following lakes: Hudson River, NY Potomac River, MD Kerr Lake (buggs Island), NC/VA Lake Erie Western Lake St Clair Lake Norman, NC Beaver Lake, AR Lay Lake, AL Lake Dardanelle, AK Pickwick, AL Wheeler, AL Guntersville, AL Lake Eufala, AL Lake Semin...

edge

I am looking for quality hydrographic maps for the following lakes: Hudson River, NY Potomac River, MD Kerr Lake (buggs Island), NC/VA Lake Erie Western Lake St Clair Lake Norman, NC Beaver Lake, AR Lay Lake, AL Lake Dardanelle, AK Pickwick, AL Wheeler, AL Guntersville, AL Lake Eufala, AL Lake Semin...

edge

I have a flipping stick built on a Talon blank that is awesome in every sense of the word! Big problem, the handle is garbage and the reel lock system is pooched. The handle is cork. Can a whole new handle be put on this rod and the old one removed or is the rod finished? Your suggestions and opinio...

edge

Looking to tie my own flipping jigs. Does anyone know of any sources for good quality skirts/rubber and jig making materials?

Looking forward to your replies.

edge

For 8 and 10lb test, on a spinning reel, which line is better for finesse/dropshotting/tube dragging?

Thanks for the opinions.

Suggestions are greatly appreciated.

edge

What G-Loomis stix are you using now? Up until now, I have been using the GL3 MBR 844 rods.

edge

It's assorted. Everything from slop mats to docks, to weed, to undercut banks to trees.....you name it.

edge

Guys,

I've always thought you guys are the most knowledgeable around. I am shopping for a new flippin/pitichin stick.

I saw your postings on the frog rod and looked of the Powell line but we don't have those up in Canada.

What rods do you favour for flipping pitching.

Thanks again.

edge

What do you guys think about the Kanji frogs? Is there anything else from Japan? In terms of 'staying upright' I am referring to staying on its belly. I am going to load up my frog with rattles though. I would love the Sumo frogs if the plastic was a touch softer although I have a really good hook-u...

edge

I have been fishing Bobby's Perfect frog and am not all that impressed with it. I find it does not always stay upright as it should. I am very impressed with the Sumo frogs because it is heavier, casts farther and better hooking percentage. I have fished the Snagproof Line and find them all about th...

edge

Guys,

I'm new to dropshotting...we'll not new but have not mastered the art.

My biggest stumbling block is hooks. I am drop shotting tubes, goby baits and grubs.

What size, style and brand do you recommend? I am fishing mostly for smallmouth.

Thanks for any and all help,
Jonathan

Search found 46 matches

Tags

Notice