Minn Kota Maxum question
Minn Kota Maxum question
My 65lb Minn Kota Maxum does not keep the height I set it to. It keeps sliding down lower in the water. I hear there is a replacement clamp that will fix this. Does anyone know the correct part I should order? Thanks.
- JoeLanghans
- Posts: 309
- Joined: Wed Aug 03, 2016 8:47 pm
Re: Minn Kota Maxum question
Here you go: https://motors.johnsonoutdoors.com/Part ... %7c%7e0003Louie wrote:My 65lb Minn Kota Maxum does not keep the height I set it to. It keeps sliding down lower in the water. I hear there is a replacement clamp that will fix this. Does anyone know the correct part I should order? Thanks.
- minnkotaman
- Posts: 163
- Joined: Wed Apr 18, 2007 12:04 pm
- Location: SAN RAMON
Re: Minn Kota Maxum question
I'm pretty sure i have 1 down in my shop,
I'll have to look up the price but
you could also put a hose clamp on your shaft
either above or below the clamp.
Jim l.
I'll have to look up the price but
you could also put a hose clamp on your shaft
either above or below the clamp.
Jim l.
Copyright © 2013-2024 WesternBass.com ®