Need to Find a Reputable Machine Shop
-
- Posts: 80
- Joined: Fri Dec 09, 2005 7:52 pm
- Location: Las Vegas, Nevada
Need to Find a Reputable Machine Shop
I've got a 2007 VZ225 Yamaha. Today I pulled the heads and as suspected #2 cylinder is a mess. I'd like to find a quality shop to do the rebore. I'll bore out all 6 cylinders; hopefully only one size over. I'm in Las Vegas but I'll deliver the block to California or Lake Havasu for a top notch shop. Top photo is the head. I'll buy a new head for the port side. Recommendations?
Re: Need to Find a Reputable Machine Shop
Hydro Tec, box up the dressed powerhead, ship to them, they can dyno test it after rebuild and have it ready to install, can also modify with phase kit for more hp.
Nelson
Nelson
Make every day a good day!
-
- Posts: 80
- Joined: Fri Dec 09, 2005 7:52 pm
- Location: Las Vegas, Nevada
Re: Need to Find a Reputable Machine Shop
I looked at Hydrotec and want to trim my costs from their complete rebuild service...ot to mention the risk of shipping.
I figured out I had a pre-ignition condition...failed fuel injector and everything I've researched to date supports that conjecture. Found a machine shop in Las Vegas recommended by my Toyota mechanics and by Las Vegas Marine.
I figured out I had a pre-ignition condition...failed fuel injector and everything I've researched to date supports that conjecture. Found a machine shop in Las Vegas recommended by my Toyota mechanics and by Las Vegas Marine.
Copyright © 2013-2024 WesternBass.com ®