humminbird 596c HD DI problems
Moderators: Triton Mike, Doug Vahrenberg
humminbird 596c HD DI problems
Hi just picked up a new 596c HD down imaging unit so I removed my 565 from the front and installed this unit just like 565 with the ducer on the trolling motor. Problem is when I went out to the lake and put down the trolling motor it worked great but as soon as I hit the motor power it affected the screen on the unit. lines up and down and a change in depth. So when I got back I thought the motor was the problem so I took the ducer off and moved it away from the motor but still same problem. I then took the power cord from my 898 and pluged it in to power up and no problem. changed power to different location and powered up seemed to be ok but when I set it all back up and hit the motor it caused the same problem. I'm at a loss? any help in solving this would be apreciated. thanks
-
- Posts: 326
- Joined: Sun May 06, 2007 6:35 pm
- Doug Vahrenberg
- Posts: 389
- Joined: Wed Mar 02, 2011 2:51 pm
- Contact:
Re: humminbird 596c HD DI problems
Call HB Customer Service 800-633-1468 they have steps to help kill RF Noise
Skeeter, Yamaha, MinnKota, Humminbird, Dobyns, LakeMaster, Transducer Shield & Saver, LuckyCraft, Daiwa, Dave's Custom Baits, OMEGA Tackle, Elite Tungsten, Angler Innovation, Massey Ferguson
Re: humminbird 596c HD DI problems
thanks for the info. I did get in touch with humminbird and there is a power cable for my unit that has noise filter built into it, appearantly this unit does not come with it like the 898 and up units do, so they are sending me one free of charge which is great, they said it should take care of any interferance problems. thanks again
Copyright © 2013-2024 WesternBass.com ®