Page 1 of 1

NEKO RIG FROM SHIN FUKAE

Posted: Sun Feb 04, 2018 12:41 pm
by GEORGE D.
has anyone use this set up if so were did you buy the tool and tubing thanks george

Re: NEKO RIG FROM SHIN FUKAE

Posted: Sun Feb 04, 2018 2:15 pm
by BigBassDaddy1190
.

Re: NEKO RIG FROM SHIN FUKAE

Posted: Sun Feb 04, 2018 2:44 pm
by rangerz20
The tool is used to make banded jig and spinnerbait skirts. Not sure about the tubing. I use clear shrink tubing.

Re: NEKO RIG FROM SHIN FUKAE

Posted: Fri Feb 09, 2018 4:36 am
by WB Staff
@George

If you didn't catch this other thread, there are a few links to buy the pliers ... one is even under $10.

neko-rigging-tricks-for-your-senko-with-t112871.html

ICYMI


Re: NEKO RIG FROM SHIN FUKAE

Posted: Fri Feb 09, 2018 11:38 pm
by GEORGE D.
thank you

Re: NEKO RIG FROM SHIN FUKAE

Posted: Tue Feb 13, 2018 5:15 am
by AD
The tool is a different take on placing a band on a bait that looks like it works well. The bands are just silicone tubing.
I buy both silicone and latex tubing in various sizes and cut my own bands according to my needs. The only draw back I see is the bands and tool are separate. When I invented The banding tool. What every one calls a wacky tool is why I
put the band holding handle on the tool. Convenience and ease of use. The tool in the video is still a pretty cool spin on banding a bait.

Re: NEKO RIG FROM SHIN FUKAE

Posted: Tue Feb 13, 2018 8:49 am
by GEORGE D.
hi ad were can you buy the tubing at thanks

Re: NEKO RIG FROM SHIN FUKAE

Posted: Wed Feb 14, 2018 12:23 am
by AD
George
if you type in silicone tubing in your internet search browser you will get multiple sources.Pick the size and quantity at the best price point and cut the tubing to the size that fits your need.

Re: NEKO RIG FROM SHIN FUKAE

Posted: Wed Feb 14, 2018 1:37 pm
by GEORGE D.
hi ad what size silicon tube do you recomend for 5 and 6 inch senko thanks george

Re: NEKO RIG FROM SHIN FUKAE

Posted: Thu Feb 15, 2018 4:00 am
by AD
George,
I would choose tubing with an I.D. 1/16" smaller than the Senko baits you are using. The tubing wall thickness in 1/16"
would be fine. You can place the hook under the banded bait with the hook oriented parallel to the bait for Neko or Wacky rigging. You can also put the hook through the band so the hook is perpendicular to the bait whenWacky rigging.
I personally don't have or use any of Mr. Yamamoto's baits. I hope this helps you.