REVO ® SX
CUTTING EDGE DESIGN WITH ADVANCED PERFORMANCE
The Revo ® SX has a more powerful D2 Gear System™, the next generation of Duragear TM , which provides enhanced efficiency and precision when on the water.
• 9 stainless steel ball bearings + 1 roller bearing provides smooth operation • X2-Cräftic™ alloy frame for increased corrosion resistance
• C6 carbon handle sideplate provides significant weight reduction without
sacrificing strength and durability • Carbon Matrix™ drag system provides smooth, consistent drag pressure
across the entire drag range
• D2 Gear Design™ provides a more efficient gear system while
improving gear durability • MagTrax™ brake system gives consistent brake pressure throughout the cast • Infini II™ spool design for extended castability and extreme loads
• Compact bent handle and star provide a more ergonomic design • Ti coated line guide reduces friction and improves durability
MAGTRAX ™ BRAKE SYSTEM
A turn of the dial moves the magnetic braking system closer to the spool which allows for additional cast control and braking force.
MODEL #
RVO3 SX RVO3 SX-L RVO3 SX-HS RVO3 SX-HS-L
SAP #
1265421 Box 1265422 Box 1265423 Box 1265424 Box
MONO CAPACITY
12 lb/145 yd 12 lb/145 yd 12 lb/145 yd 12 lb/145 yd
BRAID CAPACITY
30 lb/140yd 30 lb/140yd 30 lb/140yd 30 lb/140yd
MAX DRAG
20 lb 20 lb 20 lb 20 lb
GEAR RATIO
6.4:1 6.4:1 7.1:1 7.1:1
INCHES PER TURN
26 26 29 29
WEIGHT
6.65 oz 6.65 oz 6.65 oz 6.65 oz
HAND BEARINGS RETRIEVE
10 Right 10 Left 10 Right 10 Left
REVO ® S
THE NEXT GENERATION OF LOW PROFILE DESIGN
Whether you want distance or control, the pitch centrifugal brake system in the Revo ® S provides the best of both worlds. With a combination of 3 self adjusting spring loaded brake blocks and 3 non-spring loaded brake blocks, the Pitch centrifugal brake can be adjusted to suit any fishing situation.
• 7 stainless steel ball bearings + 1 roller bearing provides smooth operation • X2-Cräftic™ alloy frame for increased corrosion resistance • Carbon Matrix™ drag system provides smooth, consistent drag
pressure across the entire drag range • Pitch centrifugal brake system • D2 Gear Design™ provides a more efficient gear system while
improving gear durability • Compact bent handle and star provide a more ergonomic design
MODEL #
RVO3 S
24 RVO3 S-L
PITCH CENTRIFUGAL BRAKE
Utilizes 6 brake blocks (3 spring loaded and 3 non spring loaded). The spring loaded brake blocks act only when the spool is under high revolution (1st part of the cast) and will then disengage to give maximum distance. The non spring loaded brake blocks act on the entire cast to give maximum control throughout the cast.
SAP #
1265425 Box 1265426 Box
MONO CAPACITY
12 lb/145 yd 12 lb/145 yd
BRAID CAPACITY
30 lb/140yd 30 lb/140yd
MAX DRAG
20 lb 20 lb
GEAR RATIO
6.4:1 6.4:1
INCHES PER TURN
26 26
WEIGHT
7.44 oz 7.44 oz
HAND BEARINGS RETRIEVE
8 Right 8 Left