hds gen three water temp
Moderator: Ken Sauret
-
- Posts: 76
- Joined: Tue Dec 27, 2016 7:42 pm
hds gen three water temp
please help. I've seen this posted before and unable to find the fix. I can reset my units to default and the water temp shows up. after a few trips I loose it again. im assuming after I alter the settings. any way to reset the water temp to show back up on the graph? thanks wb for all the help. hds 9 and 12 gen 3
-
- Posts: 776
- Joined: Sun Oct 18, 2009 7:39 pm
- Location: Paso Robles California
- Contact:
Re: hds gen three water temp
Your digital water temp is part of Edit Overlay Data. If it is not working, delete it and replace it again on the screen you want it on. Configure the water temp to make it what you want it to look like. Now go to Networking under Settings, choose Sonar and go to Water Temp. Change the Scope from Global to Local. Global means the head unit will use all temp devices in the boat to find the water temp, Local means the head unit will only use the devices that are plugged into the head unit for data.
Ken Sauret
Lowrance Pro Staff
Lowrance http://www.lowrance.com/
Yamamoto https://store.baits.com/home
Dobyns Rods http://www.dobynsrods.com/
Yamaha http://www.yamaha-motor.com/
Personal Web Site http://kensbassfishing.weebly.com/
Lowrance Pro Staff
Lowrance http://www.lowrance.com/
Yamamoto https://store.baits.com/home
Dobyns Rods http://www.dobynsrods.com/
Yamaha http://www.yamaha-motor.com/
Personal Web Site http://kensbassfishing.weebly.com/
-
- Posts: 76
- Joined: Tue Dec 27, 2016 7:42 pm
Re: hds gen three water temp
thanks ken will give it a try
Copyright © 2013-2024 WesternBass.com ®