Help!!! Need a NEMA 2000 part......

Moderator: Ken Sauret

Post Reply
User avatar
SKTR 20i
Posts: 474
Joined: Sun May 22, 2005 11:46 am
Location: Roswell, Ga.

Help!!! Need a NEMA 2000 part......

Post by SKTR 20i »

One of my Blue T-connectors went bad and they don't make them anymore. Anybody got a spare I can buy from them??? Pretty please!!!

Never had one fail before.

Thanks, John
User avatar
ACRon
Posts: 466
Joined: Mon May 23, 2005 8:46 pm

Re: Help!!! Need a NEMA 2000 part......

Post by ACRon »

Did you try LEI. You might have to try calling them or sending and email. They had some blue parts in the clearance area so they might have some more that aren't listed. Last resort might be to call Lowrance support and see if they can come up with one from their service department.
http://www.lei-extras.com
User avatar
SKTR 20i
Posts: 474
Joined: Sun May 22, 2005 11:46 am
Location: Roswell, Ga.

Re: Help!!! Need a NEMA 2000 part......

Post by SKTR 20i »

Got one, thanks all.
User avatar
Morgan
Posts: 401
Joined: Sat May 07, 2005 5:48 am
Location: Madera
Contact:

Help!!! Need a NEMA 2000 part......

Post by Morgan »

I need two (2) Blue tee connectors. Where did you find them? I've been searching everywhere. LEI doesn't show them unless in an expensive kit, and they haven't responded to my inquiry. Other sites are all showing out of stock.

Morgan
User avatar
Morgan
Posts: 401
Joined: Sat May 07, 2005 5:48 am
Location: Madera
Contact:

Re: Help!!! Need a NEMA 2000 part......

Post by Morgan »

I think I found some on EBAY late last night. I'll know in 4 days.
Morgan
User avatar
Marc
Posts: 1035
Joined: Sat May 07, 2005 9:08 pm
Location: Steilacoom, WA
Contact:

Re: Help!!! Need a NEMA 2000 part......

Post by Marc »

The blue network Tees have been discontinued because they are not waterproof, and they have not been reliable. I would not use them in my boat, and highly recommend converting to the current NMEA 2000 red network system. Then you won't need the conversion cables for your HDS units or other accessories.

I might have a couple still if you can't get them from somewhere else. I also have some never used conversion cables also for red to blue.

ciao,
Marc Marcantonio
www.RangerBoats.com
www.Evinrude.com
www.QuickDropsWeights.com
www.Yamamoto.Baits.com
www.Lamiglas.com
www.Gamakatsu.com
www.LuckyCraft.com
www.Lowrance.com
www.TransducerShieldandSaver.com
User avatar
Morgan
Posts: 401
Joined: Sat May 07, 2005 5:48 am
Location: Madera
Contact:

Re: Help!!! Need a NEMA 2000 part......

Post by Morgan »

They arrived Saturday.
Thanks for the heads up about the water issue.

Morgan
Ken Sauret
Posts: 776
Joined: Sun Oct 18, 2009 7:39 pm
Location: Paso Robles California
Contact:

Re: Help!!! Need a NEMA 2000 part......

Post by Ken Sauret »

To help with water intrusion, use some dialetric grease on the connections when you assemble the network. This will help keep the water out and won't interfere with performance.
Ken Sauret
Lowrance Pro Staff
Lowrance http://www.lowrance.com/
Yamamoto https://store.baits.com/home
Dobyns Rods http://www.dobynsrods.com/
Yamaha http://www.yamaha-motor.com/
Personal Web Site http://kensbassfishing.weebly.com/
Post Reply