Elite 7Ti Totalscan Question / Issue
Moderator: Ken Sauret
Elite 7Ti Totalscan Question / Issue
I have an Elite 7Ti unit on my dash, when I try and use the Totalscan Right-Left I just get a dark screen with a line down the middle.....any ideas on settings? It's set on Auto.....
Don't ask about my username, all I need to say is check yours and check them often.
HomeBrew Tackle Co.
HomeBrew Tackle Co.
Re: Elite 7Ti Totalscan Question / Issue
Have you found a fix for this? My new HDS-7 Touch is the same way. I haven't even begun to mess with it yet but the couple times I switched to DI all I saw was a line so I just switched it back to traditional since that's all i'm interested in anyway's.
Anyone else have a solution because i'm thinking about selling this unit and going back to Bird or Garmin and I don't want to sell a dud.
Anyone else have a solution because i'm thinking about selling this unit and going back to Bird or Garmin and I don't want to sell a dud.
Re: Elite 7Ti Totalscan Question / Issue
This was a reply from another forum which I posted the same question. I haven't had my boat out on the water since, so not sure if it's a fix.
This happens quite a bit after the unit hasn't been used for a while. For some reason the Elite 7 Ti doesn't auto recognize that it has a Totalscan transducer, you'll need to go an manually set it in the Settings-->Sonar-->Installation (I'm pretty sure that's the menu tree). I'm 99.999% sure this is your issue...
This happens quite a bit after the unit hasn't been used for a while. For some reason the Elite 7 Ti doesn't auto recognize that it has a Totalscan transducer, you'll need to go an manually set it in the Settings-->Sonar-->Installation (I'm pretty sure that's the menu tree). I'm 99.999% sure this is your issue...
Don't ask about my username, all I need to say is check yours and check them often.
HomeBrew Tackle Co.
HomeBrew Tackle Co.
Re: Elite 7Ti Totalscan Question / Issue
Thanks I will give that a try next time i'm out. I've had mine out twice and have had issues. Last time wasn't too bad and with the adjustments i've made at home since the last trip i'm hoping it functions properly next time out. It's a nice unit but i'm bad with this type of stuff.
Re: Elite 7Ti Totalscan Question / Issue
I'm using a TotalScan on a Gen3. After install I set the transducer type to TotalScan, left everything else in auto and all works great.
Re: Elite 7Ti Totalscan Question / Issue
Thank You
Don't ask about my username, all I need to say is check yours and check them often.
HomeBrew Tackle Co.
HomeBrew Tackle Co.
Re: Elite 7Ti Totalscan Question / Issue
I had this problem as well. Turns out the installer did not supply power to the total scan module.Lugnut wrote:I have an Elite 7Ti unit on my dash, when I try and use the Totalscan Right-Left I just get a dark screen with a line down the middle.....any ideas on settings? It's set on Auto.....
Re: Elite 7Ti Totalscan Question / Issue
Thank You everybody!!! Took the boat out yesterday, changed the transducer setting to totalscan and worked like a charm. Now just need some time (lots of time) trying to figure out what i am looking at.
FYI - there is a ton of good info at www.bassboatcentral.com on reading your graphs
FYI - there is a ton of good info at www.bassboatcentral.com on reading your graphs
Don't ask about my username, all I need to say is check yours and check them often.
HomeBrew Tackle Co.
HomeBrew Tackle Co.
Re: Elite 7Ti Totalscan Question / Issue
There is NO TotalScan module. Just a transducer. You may be thinking of StructureScan-3D, or StructureScan-HD.Bass hack wrote:I had this problem as well. Turns out the installer did not supply power to the total scan module.Lugnut wrote:I have an Elite 7Ti unit on my dash, when I try and use the Totalscan Right-Left I just get a dark screen with a line down the middle.....any ideas on settings? It's set on Auto.....
Re: Elite 7Ti Totalscan Question / Issue
yes that's it. i have the 3d scan module. it must have the total scan transducer connected to it.Edd wrote:There is NO TotalScan module. Just a transducer. You may be thinking of StructureScan-3D, or StructureScan-HD.Bass hack wrote:I had this problem as well. Turns out the installer did not supply power to the total scan module.Lugnut wrote:I have an Elite 7Ti unit on my dash, when I try and use the Totalscan Right-Left I just get a dark screen with a line down the middle.....any ideas on settings? It's set on Auto.....
Re: Elite 7Ti Totalscan Question / Issue
I must ask why you would buy the SS3D module with a TotalScan transducer. If you take a pic of the xdcr I can tell if it is 3D or not. A pic of the top. Do you have 3D functionality?
Re: Elite 7Ti Totalscan Question / Issue
I never looked at what transducer I have , but the directions on my 3dss told me to select the total scan transducer from my hds unit, so I assumed it was a total scan transducer.Edd wrote:I must ask why you would buy the SS3D module with a TotalScan transducer. If you take a pic of the xdcr I can tell if it is 3D or not. A pic of the top. Do you have 3D functionality?
Re: Elite 7Ti Totalscan Question / Issue
The TotalScan xdcr and the SS3D xdcr are two completely different pieces. You can NOT use the 3D with TotalScan xdcr. It will not connect to the module! Not sure what you are reading. There is no transducer selection involved with SS3D.
Re: Elite 7Ti Totalscan Question / Issue
Yes, I stand corrected again. I must have been reading the wrong manual. I was rather frantic that my 3dss was not working. I finally found that the installer did not supply power to the unit. A rather easy fix, but one I should not have had to make on my own.Edd wrote:The TotalScan xdcr and the SS3D xdcr are two completely different pieces. You can NOT use the 3D with TotalScan xdcr. It will not connect to the module! Not sure what you are reading. There is no transducer selection involved with SS3D.
I am now working getting my motorguide TM to stop making navigation decisions on its own. Any advice on who to ask?
Re: Elite 7Ti Totalscan Question / Issue
I had the same freaking problem when i bought it. spend like 2 hours trying to figure it out at the lake.... changed the settings for the transducer to TOTALSCAN and it worked, sometimes i have to keep changing it back to Totalscan. but yes thats your problem. is not a bad unit for the price...
Copyright © 2013-2024 WesternBass.com ®