Anyone have an old Motorguide laying around for parts or can help me with triage? I think either the capacitor or the Siemens switch went out on my 775 Beast control board. One of the two just buzzes (can't make out which) and the motor turns with only about 2lbs of thrust.
The sticker says the control board is AF157 - 01 REV D. I can't find one in the ethernet. I don't know if a later version (02 or 03) will work though I can't seem to find one of those either.
I'm good with a solder gun if anyone can point me to what the fault might be and where to get necessary parts.
Thanks!
Need control board or triage help for Motorguide 775 36V - AF157
-
- Posts: 52
- Joined: Wed Jun 01, 2016 9:17 am
Need control board or triage help for Motorguide 775 36V - AF157
Bob
===========================================
1997 Ranger 519DVS, 225 Mercury EFI, 12 and 9" HDS Gen 3s, 109 MG Tour, 10' Talons
===========================================
===========================================
1997 Ranger 519DVS, 225 Mercury EFI, 12 and 9" HDS Gen 3s, 109 MG Tour, 10' Talons
===========================================
-
- Posts: 10
- Joined: Wed Oct 25, 2017 5:00 pm
-
- Posts: 52
- Joined: Wed Jun 01, 2016 9:17 am
Re: Need control board or triage help for Motorguide 775 36V - AF157
I actually found the above before I put up my post. Problem is I don't think it is a legit website. I've tried numerous times to put this item in my cart but I get errors when trying to create an account.Blackhawk431 wrote:https://www.centerfashion.top/motorguid ... -5884.html
Bob
===========================================
1997 Ranger 519DVS, 225 Mercury EFI, 12 and 9" HDS Gen 3s, 109 MG Tour, 10' Talons
===========================================
===========================================
1997 Ranger 519DVS, 225 Mercury EFI, 12 and 9" HDS Gen 3s, 109 MG Tour, 10' Talons
===========================================
Copyright © 2013-2024 WesternBass.com ®