Lowrance Hook 2

Moderators: MKA, Mike M, Caudawg, ash

SQ Topwater
Posts: 7
Joined: Sat Jan 20, 2018 11:38 am

Lowrance Hook 2

Postby SQ Topwater » Sat Feb 03, 2018 12:32 pm

I am looking at upgrading my electronics.
We have a 2018 Nitro Z18.
I am not sure if I should go with a Hook2 7 TripleShot Combo or go with a larger screen without side scan.
Any thoughts?

Thank you
Mike

SQ Topwater
Posts: 7
Joined: Sat Jan 20, 2018 11:38 am

Re: Lowrance Hook 2

Postby SQ Topwater » Sun Feb 25, 2018 3:09 pm

Well since I did not get help on this, I decided to get the Hook2 7 Split Shot.
Only trouble now is that I am having trouble finding the gasket to flush mount it in my console.
I think it is Lowrance part# 000 14188 001.
I WILL try Boatmastrs on Monday.

Mike

mark poulson
Posts: 8973
Joined: Sun May 08, 2005 4:16 am
Location: Oakley, Ca.

Re: Lowrance Hook 2

Postby mark poulson » Sun Feb 25, 2018 7:13 pm

SQ Topwater wrote:Well since I did not get help on this, I decided to get the Hook2 7 Split Shot.
Only trouble now is that I am having trouble finding the gasket to flush mount it in my console.
I think it is Lowrance part# 000 14188 001.
I WILL try Boatmastrs on Monday.

Mike


Mike,
I know next to nothing about the newer electronics. My electronics are at least 10 years old.
That's why I didn't respond.
I thought someone who actually knew what they were talking about might respond.
I hope whatever you chose works out for you.
Boatmasters is a good outfit.
Attitude plus effort equal success
CLEAN AND DRY

SQ Topwater
Posts: 7
Joined: Sat Jan 20, 2018 11:38 am

Re: Lowrance Hook 2

Postby SQ Topwater » Sun Feb 25, 2018 7:19 pm

Mark,

Thank you for your reply. You post a lot of great info.
I thought that maybe I did wrote my request for info in such a way that the Lowrance guys did not understand what I was asking.
THANK YOU
Mike

mark poulson
Posts: 8973
Joined: Sun May 08, 2005 4:16 am
Location: Oakley, Ca.

Re: Lowrance Hook 2

Postby mark poulson » Sun Feb 25, 2018 7:23 pm

SQ Topwater wrote:Mark,

Thank you for your reply. You post a lot of great info.
I thought that maybe I did wrote my request for info in such a way that the Lowrance guys did not understand what I was asking.
THANK YOU
Mike


My experience with the Lowrance folks here is that they are very helpful.
Maybe you should try contacting them directly.
Attitude plus effort equal success

CLEAN AND DRY

Ken Sauret
Posts: 719
Joined: Sun Oct 18, 2009 7:39 pm
Location: Paso Robles California
Contact:

Re: Lowrance Hook 2

Postby Ken Sauret » Sun Feb 25, 2018 8:24 pm

I'm not sure where you are at now but the Hook 2 are great units for the money. I have not tried to mount a unit where you need a "gasket" but if you need one that is supplied by Lowrance, any Lowrance dealer can order one for you.
Ken Sauret
Lowrance Pro Staff
http://www.lowrance.com/
http://www.dobynsrods.com/
http://www.yamaha-motor.com/
http://kensbassfishing.weebly.com/

User avatar
Edd
Posts: 217
Joined: Thu Jan 21, 2016 1:08 pm

Re: Lowrance Hook 2

Postby Edd » Mon Feb 26, 2018 6:17 am

I did not reply since I was not sure of your fishing style. Some rely heavily on StructureScan and some use it just occassionly. In your installation manual you will find the correct product # for the flush mount kit.

Edd


Return to “Fishing”

Who is online

Users browsing this forum: AKBASSFISHING, Rick Perez, stratos1988 and 27 guests