Elite Ti2 transducer
Moderator: Ken Sauret
-
- Posts: 3
- Joined: Sat May 04, 2013 4:40 pm
Elite Ti2 transducer
I’m considering putting an Elite TI2 9 inch on the front of my boat. Can someone advise as to which ducker is best for the trolling motor? Can the active imaging 3-in-1 even be installed on the tm? Thanks for any info
Re: Elite Ti2 transducer
Total scan transducer. If you have a built in transducer.Call comfort troll they have a total scan bracket that is about $80 delivered also tackle warehouse has them
-
- Posts: 776
- Joined: Sun Oct 18, 2009 7:39 pm
- Location: Paso Robles California
- Contact:
Re: Elite Ti2 transducer
I agree with fishpharmer. The totalscan transducer is the best option to have traditional sonar, and all the views of Structure Scan at your feet while fishing. You have left, right and down scan along with Broadband Sonar all in one transdcuer and Jim Slusher at Comfortroll has a custom bracket that will let that longer transducer mount to the bottom of the trolling motor. You can call Jim on his cell phone to order one of the Totalscan transducer mounts. His cell number is 805-610-5284.
Ken Sauret
Lowrance Pro Staff
Lowrance http://www.lowrance.com/
Yamamoto https://store.baits.com/home
Dobyns Rods http://www.dobynsrods.com/
Yamaha http://www.yamaha-motor.com/
Personal Web Site http://kensbassfishing.weebly.com/
Lowrance Pro Staff
Lowrance http://www.lowrance.com/
Yamamoto https://store.baits.com/home
Dobyns Rods http://www.dobynsrods.com/
Yamaha http://www.yamaha-motor.com/
Personal Web Site http://kensbassfishing.weebly.com/
-
- Posts: 3
- Joined: Sat May 04, 2013 4:40 pm
Re: Elite Ti2 transducer
Thanks so much for the replies. The Lowrance website does not list the Totalscan as an option for the TI2 units. They show only an Active Imaging 2-in1, Active Imaging 3-in-1 or no transducer. Is Total Scan compatible or is the 3-in-1 an option for Tm?
-
- Posts: 57
- Joined: Wed Nov 18, 2015 6:29 am
Re: Elite Ti2 transducer
The 3 in 1 should fit on the Comfort Troll bracket
I attach the 3-1 and the Totalscan on top is the 3-1
I attach the 3-1 and the Totalscan on top is the 3-1
Re: Elite Ti2 transducer
I’ve alreadu taken one back to Bass pro, because the elites can’t seem to read that transducer!
Copyright © 2013-2024 WesternBass.com ®