Elite ti mercury readout

Moderator: Ken Sauret

Post Reply
FredP
Posts: 103
Joined: Fri Aug 26, 2005 9:47 am

Elite ti mercury readout

Post by FredP »

With a nmea system for 2 units does the system need an adapter for a mercury pro xs or is there one?
Ken Sauret
Posts: 776
Joined: Sun Oct 18, 2009 7:39 pm
Location: Paso Robles California
Contact:

Re: Elite ti mercury readout

Post by Ken Sauret »

I'm not sure if there is a way for the Elite Ti to read the data from a Mercury motor. Mercury had their Smart Craft system proprietary for years and then allowed Lowrance to read data on their HDS units. I'm just not sure about the Elite Ti units. Call Lowrance customer care or go to lowrance.com and check the FAQ's to get more information.
Ken Sauret
Lowrance Pro Staff
Lowrance http://www.lowrance.com/
Yamamoto https://store.baits.com/home
Dobyns Rods http://www.dobynsrods.com/
Yamaha http://www.yamaha-motor.com/
Personal Web Site http://kensbassfishing.weebly.com/
FredP
Posts: 103
Joined: Fri Aug 26, 2005 9:47 am

Re: Elite ti mercury readout

Post by FredP »

Ken with the latest update it gives the Ti's capability for engine readouts but I can only find Yamaha and Evenrude adapters thru the nmea system. I have a mercury with smart meter so don't really need it but always want to have options.
I'll check with Lowrance.
Ken Sauret
Posts: 776
Joined: Sun Oct 18, 2009 7:39 pm
Location: Paso Robles California
Contact:

Re: Elite ti mercury readout

Post by Ken Sauret »

I have a Yamaha SHO and it works fine. I know the Evinrude engines are compatible with the readouts but just not sure about how much access Mercury has given Lowrance for that data. Thanks for checking with Lowrance Customer Care.
Ken Sauret
Lowrance Pro Staff
Lowrance http://www.lowrance.com/
Yamamoto https://store.baits.com/home
Dobyns Rods http://www.dobynsrods.com/
Yamaha http://www.yamaha-motor.com/
Personal Web Site http://kensbassfishing.weebly.com/
wallyandre
Posts: 57
Joined: Wed Nov 18, 2015 6:29 am

Re: Elite ti mercury readout

Post by wallyandre »

FredP wrote:Ken with the latest update it gives the Ti's capability for engine readouts but I can only find Yamaha and Evenrude adapters thru the nmea system. I have a mercury with smart meter so don't really need it but always want to have options.
I'll check with Lowrance.
If you already have a Smartcraft you can get all the infos on the Ti by using the Vessel View. Just read the doc:
https://embed.widencdn.net/pdf/plus/mer ... f?u=orhjei
Post Reply