Lowrance Eithernet Question

CC626 · Post by **CC626** » Sat Feb 15, 2020 12:53 pm

Just purchased a boat with an HDS Gen 2 non touch in the console and an HDS Gen 2 non touch on the bow. I installed an HDS 9 Gen 2 touch on the console and linked all three with eithernet cables.
I am trying to use the HDS 5 on the console for my charting but when I make a waypoint on the 9 inch with structure scan it does not transfer over to the chart on the console.
Anyone know if there is something I can do?

wallyandre · Post by **wallyandre** » Mon Feb 17, 2020 2:37 pm

Be sure that you are running the latest software version on every units.

Ken Sauret · Post by **Ken Sauret** » Sun Mar 01, 2020 3:11 pm

You will need to check the Send Waypoint and Receive Waypoint in Settings. To do this hit the pages key and go to Network. In Network go down to NMEA 2000 and hit enter. Make sure the Send and Receive Waypoints are turned on in all 3 units.