I just installed and HDS 10 non-touch gen 2 to my ultrex TM. Whenever i engage the trolling motor to turn left or right there is major interference on the 2D sonar. I know what normal vibration looks like when the prop is rotating but this is different. My sensitivity is set right around 76% and the picture is great when not turning the motor. Any advice or has anyone ever dealt with this?
Thanks in advanced,
CC
Ultrex transducer interference with HDS Gen 2
Moderator: Ken Sauret
Re: Ultrex transducer interference with HDS Gen 2
I had the same issue.. there is a fuse in the head of the trolling motor that will blow if something is installed why power is live on the boat.
-
- Posts: 128
- Joined: Sat Apr 20, 2013 5:33 pm
Re: Ultrex transducer interference with HDS Gen 2
Have you tried directly connecting the power from the HDS unit to the cranking battery? Use at least 14 gauge wire and a 3 amp fuse. This really helped me
Re: Ultrex transducer interference with HDS Gen 2
Okay thank you. I just got the boat and installed a new graph on the console so that sounds like a possibility. Any idea what the fuse powers?
Re: Ultrex transducer interference with HDS Gen 2
Chris,
No I have not tried that yet. If the fuse is still is not the issue I will try that.
Thank you,
CC
No I have not tried that yet. If the fuse is still is not the issue I will try that.
Thank you,
CC
Re: Ultrex transducer interference with HDS Gen 2
Go check on YouTube. That's how I fixed mine took about 10 minutes.
Copyright © 2013-2024 WesternBass.com ®