Courser keeps locking current location
Moderator: Ken Sauret
Courser keeps locking current location
Carbon 12 keeps locking on the current location. I have to keep clearing the courser. Anyone know what the issue is?
Re: Courser keeps locking current location
Could it be you are just barely touching the screen? Doesn't take much.
Re: Courser keeps locking current location
No, not touching the screen. It will lock on a spot on its own. Happening every few seconds. As soon as I clear the courser it will lock on again in a few seconds.Edd wrote:Could it be you are just barely touching the screen? Doesn't take much.
Re: Courser keeps locking current location
Is the cursor showing up at the same location on the screen each time? At the least, I would backup my waypoints, routes, etc. and then perform a hard reset to see if that fixes the issue.
www.RangerBoats.com
www.Evinrude.com
www.QuickDropsWeights.com
www.Yamamoto.Baits.com
www.Lamiglas.com
www.Gamakatsu.com
www.LuckyCraft.com
www.Lowrance.com
www.TransducerShieldandSaver.com
www.Evinrude.com
www.QuickDropsWeights.com
www.Yamamoto.Baits.com
www.Lamiglas.com
www.Gamakatsu.com
www.LuckyCraft.com
www.Lowrance.com
www.TransducerShieldandSaver.com
Re: Courser keeps locking current location
I think it is showing up in the same location every time. I’ll try the hard reset. Thanks.Marc wrote:Is the cursor showing up at the same location on the screen each time? At the least, I would backup my waypoints, routes, etc. and then perform a hard reset to see if that fixes the issue.
Re: Courser keeps locking current location
I did a soft reset and a hard reset. I also did a cursor calibration. Cursor is still showing up about every 3-5 seconds without touching.Marc wrote:Is the cursor showing up at the same location on the screen each time? At the least, I would backup my waypoints, routes, etc. and then perform a hard reset to see if that fixes the issue.
I also found that the screen will not respond to touching 3/4" in from the edge on the left side, from top to bottom.
Looks like the screen is not working correctly. What is the procedure for sending the unit back to Lowrance?
Re: Courser keeps locking current location
I had the same issue a few years back. I unplugged the graph from all connections and it fixed the issue.
Re: Courser keeps locking current location
I could not get the issue fixed. I sent it in to Lowrance for repair/replacement. Unit is within the two year warranty.
Re: Courser keeps locking current location
Just a follow-up with my issue with the Carbon HDS-12. Lowrance replaced it with a brand new HDS-12 Live with a 3 in 1 transducer. There were no questions asked.
Re: Courser keeps locking current location
Glad you were able to get it replaced under warranty; thanks for letting us know.
www.RangerBoats.com
www.Evinrude.com
www.QuickDropsWeights.com
www.Yamamoto.Baits.com
www.Lamiglas.com
www.Gamakatsu.com
www.LuckyCraft.com
www.Lowrance.com
www.TransducerShieldandSaver.com
www.Evinrude.com
www.QuickDropsWeights.com
www.Yamamoto.Baits.com
www.Lamiglas.com
www.Gamakatsu.com
www.LuckyCraft.com
www.Lowrance.com
www.TransducerShieldandSaver.com
Copyright © 2013-2024 WesternBass.com ®