Making 50hp outboard faster

Share vehicle info.
Post Reply
Basscalade510
Posts: 21
Joined: Fri Mar 12, 2021 8:25 am

Making 50hp outboard faster

Post by Basscalade510 »

So I have a tacker classic XL with a 50hp mercury outboard, totally stock. I'm usually taking it out on the ca delta and maxing out at about 33mph (according to my helix). I'm trying to get some more top end out of it. I was looking into getting hydrofoils and possibly a new propeller but not sure where to start or what kind of improvement that would give me. You guys got any feedback/ideas?

Thanks!
Lapsbp
Posts: 82
Joined: Wed Mar 04, 2020 9:51 pm

Re: Making 50hp outboard faster

Post by Lapsbp »

What is rpm running.
I have a 60 hp on a 170 fishmaster deep v with 2/3 people I was running 4600 to 4800 rpms
That was a 15 pitch prop a d doing 12/15 mph went with a 13 in prop hidro foil
Got up to 20 mph a d 5200 rpms .then went with a 11 inch prop a.d got to 26/28 mph and 5800/6000 rpms . But if I run on just me with the 13 pitch I can run about 33/35
Mph. What I found out with
4 stroke motors
Keep a eye on rpms that's how to figure out where the motor likes to run load changes change how they run with the smaller motors and the planning out changes with the prop too . But the hydro foils help out a lot on the motors too. I will not take mine off
kevin pugh
Posts: 11
Joined: Wed Mar 14, 2007 3:57 pm

Re: Making 50hp outboard faster

Post by kevin pugh »

Four bolt tune up required, You will spend a lot of money and time to get another 3 MPH, Not worth it. Sell your motor and buy the one that has the max recommended horsepower!
Post Reply