Bass Fishing Forum - Westernbass.com

jsc11700

Boat is located in Southern Oregon and is still available.

jsc11700

jsc11700

jsc11700

2007 Ranger Z20. 225 Mercury Verado with 142 original hours. Excellent condition 9/10. Always stored indoors. Lowrance HDS 7 at console and bow with side scan and networked. Minkota 24v 80lb trolling motor. $28,000.00 Contact Jeremy- 541-887-7779 or jeremyc@bellhardware.com.

jsc11700

Boat is still available

jsc11700

2007 Ranger Z20. 225 Mercury Verado with 142 original hours. Excellent condition. Always stored indoors. Lowrance HDS 7 at console and bow with side scan and networked. Minkota 24v 80lb trolling motor. $31,000.00 Contact Jeremy- 541-887-7779 or jeremyc@bellhardware.com for more pictures.

jsc11700

I have a 2007 Ranger Z20 with 225 Verado. 142 hours. Let me know if you want pictures. I am asking $26,000

jsc11700

Ok that's good news. Thanks for the info.

jsc11700

I heard a nasty rumor that Limit Out Tackle in Clearlake Oaks has closed! Can anyone confirm if this terrible rumor is true or not?

jsc11700

Just an update for any others out there with Verado's who might have been following this. I played with the Prop vent holes. Having an open hole or two does make a difference in hole shot. Had a tourney last weekend and after putting in one large hole and two small ones my boat jumped out much quick...

jsc11700

Scott,

I have played around with the plugs a bit but haven't completely removed any. Maybe I will try that. I was under the impression just from dock talk that the Verado really liked all the holes plugged.

jsc11700

Superneal,

What is your top end RPM with the 26P?

jsc11700

Hey guys, Curious if any one is running a BRAVO on a Verado and what pitch you are running? I have an 07 Z20 with 225 Verado. Currently running a 25P Tempest. Getting good Top End Speed and lift but it's sluggish out of the hole especially with a buddy and full live wells. Looking to get better hole...

jsc11700

Awesome!

Thanks

jsc11700

Who will be Open this Sunday morning for inspection? Times? Is Limit Out in Clearlake Oaks still open?

Thanks!

jsc11700

I have been looking at the eco-diesel out of the corner of my eye as well. I pull my boat on hilly terrain quite often. What kind of power do these have pulling up a hill? Ken Mah if you are following this maybe you can chime in I saw that new rig you have has the Eco-Diesel stamp on it.

jsc11700

I called Trinity Alps Marina last weekend, and was told the only ramp open to the public right now is Minnersville, but no dock is available. They hoped to have their ramps open to the public by the first of May.

jsc11700

Does anyone know if Minersville has a dock in the water at the ramp or do you need to beach?

Thanks

jsc11700

TonyM wrote:Call the Casino motel and ask. The desk clerk does them. I think I got one in the middle of the night there before.

Awesome! I didn't realize they did them. Thanks for the heads up.

jsc11700

If you are launching south, Jimmy at Clear Lake Bait & Tackle opens at 6:00 AM on Friday & Saturday, 6:30 AM the rest of the week. 1-707-994-4399, right by the Red Bud ramp If you are launching north (Lakeport), Clearlake Outdoors does inspections but I am not sure of their hours. Phone 1-7...

jsc11700

Going to be coming into Clearlake early next Friday Morning 3/13. Who is open around 6:00 am for boat inspections?

jsc11700

Do you know if they have a dock in a Packer's Bay yet?

jsc11700

What an awesome bass lake Klamath would be though, if they could thrive it would be an awesome venue for some big tourneys, and a financial plus for ol k-falls.the one thing I find weird is clear lake has some off the wall algae blooms as does Klamath but they survive. This has always been a topic ...

jsc11700

up to Chiloquin!! But, Jeremy, if you have a bote and are still willing to be the guide, PM me your contact info and I will contact you early June if all the current plans pan out. Thanks for the input. Just exactly the stuff I needed to know. By the way, finally heard from AskOregon.com. They agre...

jsc11700

Hey, I have been told there is decent largie fishing in the wetlands area of Agency Lake, Oregon. Since I will be staying in that area next June, am looking for info on the warm-water species, forage, launching facilities, permits and such. State of Oregon has been no help whatsoever. Anyone know t...

jsc11700

I have tested the battery, checked and cleaned all connections, disconnected all leads, replaced the inline fuse. Everything I can think of. Here is. Link with a video of what it is doing. http://youtube.com/watch?v=TOgH6EPGU6Y

jsc11700

I have a 2007 z20 with a ranger edition 3 bank dual pro charger. I went out today to plug my batteries in for a bit to give them a maintenance charge as it has been about three weeks since used. All three banks immediately go to green but I just happened to be doing some other work and noticed somet...

jsc11700

NoCal, You mention the Touches having issues defaulting to the 2D transducer but these are GEN2 units. Is this issue the same with these units? I have noticed that when switching from 2D to LSS there is occasionally a few decimal difference in the temp reading, leading me to believe that it truly is...

jsc11700

Great thanks Ken!

jsc11700

Finally getting ready to mount my electronics! I have an Hds 7 with structure scan that I will be mounting on a z20. The current 2d transducer that I have for this unit is the HST-WSBL. I would like to mount this one as a thru hull transducer. Will this one work as a thru hull? I realize that I will...

jsc11700

Taking reasonable offers. Great Running Boat! New boat is in the garage and would hate to see this sit all winter. This would make a great first boat for someone.

jsc11700

$6,300.00

jsc11700

I have a HDS 7 that I need to put on a RAM mount. Is the D111U-C compatible with this unit or will I need a smaller RAM mount? This unit will be mounted at the console of my new to me Z20 :D You will want to add the curved base Ram mount on the Z20 if you havent already. Where can I get the curved ...

jsc11700

That is my conclusion too. I think I have decided on a dek-it mount. Thanks for the reply.

jsc11700

$6,500

jsc11700

Has anyone flush mounted an HDS7 in the bow of a Ranger Z20. Current flush mount is a Lowrance x-135. I would like to flush mount it if possible but it looks like the fit may be tight. Am I better off going with a Ram Mount or Dek-it?

jsc11700

$6,700

jsc11700

I have a HDS 7 that I need to put on a RAM mount. Is the D111U-C compatible with this unit or will I need a smaller RAM mount? This unit will be mounted at the console of my new to me Z20

jsc11700

Electronics are no longer available on the boat. I have decided to pull them and put them on my new boat. Asking $7,200.

Thanks

jsc11700

1996 Nitro Savage 884 dual console bass boat. 18'8" . 1996 Mercury 175HP EFI. Motor guide 67lb trolling motor. Compression and inspection just completed by certified Mercury Technician at American Marine. Quickleen and stabil in every tank of gas. Motor runs absolutely flawless. I do not know t...

jsc11700

Ok thanks

jsc11700

Still looking. I'm in Southern Oregon but willing to drive. Serious buyer.

Thanks

jsc11700

Looking for a low hour well kept used Ranger z20/z21 or Z520. Prefer Mercury Outboard. Dual Console only. 30K price range.

Thanks

jsc11700

Hey guys. I am in the market for a "new to me" ranger. I am eyeing a z20, z21, or z520. Aside from sitting in the new models on the showroom floor I have never been in any of these. Is there anyone in the Nor Cal area (Redding/Shasta) that would be willing to give me a test ride in the nex...

jsc11700

Hello. Is your boat still available?

jsc11700

Thank you all for the info. As I get a little closer to pulling the trigger I may take a couple of you up on the offer for a test run.

jsc11700

I am going to be in the market to upgrade my boat soon and I have decided that I want to go with a Ranger. I have a question regarding the hull designs over the past few years. What is the difference in hull design from the early 520vx and the newer Z520 series? Also Ranger introduced the 'Z series'...

jsc11700

I believe U of O still has a bass team as well. They have done pretty well at some of the FLW college events in the past

jsc11700

Just installed 2 brand new HDS7 Gen2 with Structure scan on my boat. WOW!!!! I am having an small issue with one of them however. My issue is that when I put it in standby mode and then try to wake it back up the screen is very dark and almost impossible to see. Adjusting the brightness does not fix...

jsc11700

Hey guys,

Thinking about a trip to Trinity soon. Does anyone know if the launch ramp at Trinity Center is useable?

Thanks in advance.

Search found 94 matches

Tags

Notice