Bass Fishing Forum - Westernbass.com

SOLD

Sold

I removed the Rod Holder out of my Triton 19XS about a year ago. I found that I carry more rods than it will allow. Perfect condition. $50.00 Mike

I have the rod holder from my 2014 Triton 19 XS that I removed about a year ago. I found that I just carry too many rods. It's in perfect condition $50.00 - Mike

YES, Still available.

This is a 4 year old Fortrex with a 45" shaft.
I'm including a brand new bounce strap and stabilizer arm and bracket.
It has a 2 month old Cool Foot pad installed.
I've upgraded so I'm letting this go.
It's in Excellent Working Condition.
$750.00

I purchased a 1810257 foot pedal that I found out is not compatible with my 2017 Talons. I'm looking for the right one.

CAN'T GET THEM TO DOWNLOAD. Send me a text and I can send them to you.

I HAVE SWITCHED OVER TO A MINN KOTA 112 AND DON'T NEED A BACKUP. THE WIFE SAYS IT'S IN THE WAY OF HER PADDLE BOARD!!! THIS IS READY TO BE INSTALLED. USED IN THE EAST DELTA AND LAKES ONLY. PRICED AT HALF THE NEW COST. I CAN TEXT OR EMAIL YOU PICTURES. IT HAS: 36VOLT 109 POUNDS 50" SHAFT LOWRANCE...

I SWITCHED OVER TO A MINN KOTA 112 AND DON'T NEED A BACKUP. THIS IS READY TO BE INSTALLED. EAST DELTA AND LAKE USE ONLY. PRICED AT HALF THE NEW COST. I CAN TEXT OR EMAIL YOU PICTURES. IT HAS: 36VOLT 109 POUNDS 50" SHAFT LOWRANCE BLUE PLUG W/ INTERNAL TRANSDUCER NEW STEERING CABLE THREE BLADE MA...

From what I understand. Just connecting the yellow ended ethernet cables between them should link them.

I NEED AN HDS 8 MOUNTING BRACKET - HAVE AN HDS 9 THAT I WOULD TRADE OR WILL PURCHASE.

I HAVE A TWO YEAR OLD MOTOR GUIDE DIGITAL TOUR EDITION THAT'S BEEN SITTING IN THE GARAGE FOR 6 MONTHS AND IS READY FOR INSTALLATION. I SWITCHED OVER TO A MINN KOTA 112 AND DON'T NEED A BACKUP. IT IS: 36VOLT 109 POUNDS 50" SHAFT LOWRANCE PLUG W/ INTERNAL TRANSDUCER NEW STEERING CABLE THREE BLADE...

I HAVE A TWO YEAR OLD MOTOR GUIDE DIGITAL TOUR EDITION THAT'S BEEN SITTING IN THE GARAGE FOR 6 MONTHS AND IS READY FOR INSTALLATION. I SWITCHED OVER TO A MINN KOTA 112 AND DON'T NEED A BACKUP. IT IS: 36VOLT 109 POUNDS 50" SHAFT LOWRANCE PLUG W/ INTERNAL TRANSDUCER NEW STEERING CABLE THREE BLADE...

I HAVE A TWO YEAR OLD MOTORGUIDE DIGITAL TOUR READY FOR INSTALLATION.
36VOLT
109 POUNDS
50" SHAFT
LOWRANCE PLUG W/ INTERNAL TRANSDUCER
NEW STEERING CABLE
THREE BLADE MACHETE PROP
$750.

ASKING $800. FOR MY TWO YEAR OLD MG. DIGITAL, 36VOLT, INTERNAL SONAR W/LOWRANCE CONNECTOR, NEW STEERING CABLE, MACHETE PROP, EXCELLENT CONDITION. SEE PICS UNDER MMOORE83's AD. NOT SURE HOW TO ATTACH TO YOURS.
MIKE @ 925-813-5202

This is a 2 year old complete Motorguide trolling motor. Ready to bolt on and go fish $800.00
109 pounds
36volts
50" shaft
new steering cable
three blade machete prop
very good condition
Text - email - call
925-813-5202
mam_832001@yahoo.com
I'm in the Antioch - Pleasant Hill Area

Ken,
Got it thanks. That's what I thought so I ready to go.
Thanks for the patience,
MMoore

Wow, sorry - Text me at 925-813-5202 if interested.

This is for a 2 year old Digital Tour Motor Guide Trolling motor.36 volt, New steering cable, 50" stainless shaft, Three blade Machete Prop, Internal Transducer with Lawrence connector.
I've upgraded to a Fortrex 112 so it must go.
$850.00

Ken, Exactly what I want to do. I want the HDS7 for the sonar use and the HDS8 (with the bigger screen) for my chart plotting and way pointing. So I want to put the 8 on a ram mount off to the starboard side. This is where I'm still confused. The HDS8 unit has a built in antenna but do I still need ...

Thanks Ken, A couple of more questions if you don't mind. My Minn Kota Fortrex was ordered with the us2 internal transducer that's what is running my HDS7. Are you saying that I should attach the gen 2 transducer for the HDS8 instead of splitting with the us2 that I'm using for the HDS7? When I moun...

I'm replacing my counsel mounted HDS8 gen 2 with an HDS9 gen 2 Touch unit. 1) Can I use the existing shoot through transducer that ran the HDS8? 2) Since the HDS9 already is structure scan ready, do I just need to purchase the LSS transducer or is that only if I want a high def picture? :? 3) If I d...

Just wondering what everyone is using and if it's working. Dropshot and a crawdad red Speedtrap. has been the only thing working for me since December 1st. That has been in deep water 8'+.

THAT, depends on who your hunting with and how they've treated you in the past!

As a duck hunter and fisherman - I say fish it if no one is home. Approach the blind slowly from the open end and see if there is a boat inside of it. We don't swim out to our blinds. If there is not a boat then fish away. As a hunter I wouldn't mind as long as you didn't disturb the decoy set or th...