Bass Fishing Forum - Westernbass.com

MT

I just bought that mold. Takes a 30 degree hook. The head he is describing uses a 90 and he wants a 1/0. Even if you modified it, that cavity wouldn't take a 1/0.
Another option would be the minnow head with a wire keeper. Not a very realistic head but you can at least put eyes on it.

MT

Herring head underpin.
Specifically HHU-5-A
You can put a 1/0 5313 in the 3/8ths cavity. The collar and keeper will take up the entire hook shank. If you don't like that trim it off and whip finish a wb400 keeper on there.
Obviously you omit the insert...

MT

Is there a dock at the ramp?

MT

Must be that new math they're teaching these days.
677<680

MT

Maybe mention where it was held.

MT

I feel perfectly safe when I'm up there but I live in Stockton. I think most would agree that if and when we get some rain there will be a lot less complaining. Definitely feel for those folks living back in those canals though. Hope they get some relief this winter.

MT

There hasn't been one single improvement made there since they started charging entry fees. Still have to use vault toilets. The docks at the ramps are garbage. Pegs missing as well as sharp metal protruding where you tie up. Makes you proud to be a taxpayer.

MT

All rods lightly used. Half retail price for each one. Willing to deal if you buy multiple rods. Text Mike 209-481-9824 with questions Pick up only in Stockton 1) Phenix Maxim 6'10"MH Fast Action 1/8-3/4 oz 8-14lb line $60 2) TWO Shimano SLX 6'10"M Extra Fast 1/4-1/2 oz 8-15lb line $50 eac...

MT

Keep the one you have. Sounds like you have a really nice boat already. The rod storage issue doesn't warrant getting a new boat IMHO. As far as suggestions I can't think of a glass boat rated for a 150 that will meet your size restrictions for storage. Don't think you'll be happy with a tin either....

MT

I launched at Redbud a couple months ago at the lake's "highest" point for this year. I wouldn't launch there again but I'm overly cautious with my rig. Definitely use your trolling motor until you get out far enough to run the big motor.

MT

Mike wrote: ↑Tue May 17, 2022 10:03 am Might as well ruin the last sleeper lake in California

Was thinking the same thing. Just didn't know how to say it in a civil manner.

MT

Now's a good time to sell your boat for sure. Maybe find a drought proof hobby like bowling or racquetball if you're a little more active.

MT

It's good stuff and definitely a good idea for anything plastic, pvc, etc. I use it on my seats but I don't think I would put it on my graph screens. Couldn't hurt to put it on the housing.

MT

It will be a homeless encampment within a month.

MT

Does anyone know if they moved the dock at Bidwell yet? Can't seem to get an answer by phone.

MT

My '19 Basscat had those little EPA California flap thingies installed in the filler necks. I was able to remove them both and it solved my problem. Not sure if that's the issue with your Ranger or if you can even access them but it might be worth a look.

MT

No launch.
No dock
No water.

MT

Red-eye/spot abomination

MT

What lakes do you guys fish up there?

MT

Go to Oroville if you're willing to launch here.

MT

Didn't I hear they were having trouble with traction on the ramp due to algae? Perhaps a remedy to prevent liability? Who knows...

MT

You guys are very consistent and off to a great start this year. We've fished the last three and have really stunk it up thus far. Keep up the good work with the videos.

MT

Glory and Tuttletown both have plenty of ramp left.

MT

Please tell me that's for 7 fish!?!?!

MT

Only one left.

MT

Both are Sold

MT

Yep. Or 9.072 grams if you're into the metric system.

MT

Take a look at the Do it "live bait jig mold" or " walleye head jig mold"
Might fit the bill with a little modification

MT

I can't think of any mold with a head cavity that big that you could modify to fit a hook that small. You can make a Mustad 32746 1/0 work in the Minnow head mold but a 2/0 would fit better. If you want a heavier hook like the Gamakatsu 604 a 1/0 is a no go.

MT

Make sure you cut off any hardware on the top two wires. Attach the centering pins directly to the wires. They'll spin if you have swivels in the mix.

MT

For the Senko I'd probably go with the 893. For the other two techniques it would be a coin flip between the other two rods. Maybe if you were around docks or needed to be really accurate go with the shorter of the two?

MT

I've had the velcro strap on mine get under the pedal and kick it out of spotlock. I wrap it around the cables now to prevent it from happening. Hopefully it is something simple with yours.

MT

Steep. Go to B&W

MT

Csuhchris wrote:NO BUENO, Lucerne Ramp is toast. More importantly, NICE marina pre spawn giants will have to look for hitch in Rodman and other creeks.

Lucerne ramp is toast now or will be soon?

MT

That shop is never going to take care you. Same story pops up over and over again with the same company. Take care of the graphs yourself. Probably something simple from a shitty installation job at the shop. Hopefully you get a new trailer. Once you do, you should never set foot in that place agai...

MT

That shop is never going to take care you. Same story pops up over and over again with the same company. Take care of the graphs yourself. Probably something simple from a shitty installation job at the shop. Hopefully you get a new trailer. Once you do, you should never set foot in that place again...

MT

While we're on the subject of light action. When are those 0 power finesse bait casters I saw on the website coming out? For me, that would be the perfect Delta rod for all the 9-11 inch fish I catch. ( Most people call these fish 1.5-2lbers). They're not. They're 9-11 inches. Reminds me of the old ...

MT

I bet that Dobyns you mentioned would be a fun rig. I'd go with at least a 1500 or 2000 size reel though. Line can get a little squirrelly with a small diameter spool at times.

MT

^^Yes that is what I was asking, thanks^^

MT

Thank you Sir.

MT

Has anyone launched here recently? Wondering if you still have to go through a bunch of mud to get to the ramp? How about the parking situation?

MT

gixxer464 wrote:The next time I see a fly rod during a bass tournament would be my first time.

One member of the winning team at the last WWBT event at Shasta was fly-fishing only.

MT

So an 8ft spinning rod with a float and fly would be ok? The fly rod is actually a disadvantage compared to a spinning rod with a slip bobber. It's a fixed leader length with the fly rod and it's not an easy rig to cast. I wonder if the old tule dipping method would be effective these days. I stink ...

MT

Looks like this technique is gaining popularity.

MT

The visitorcenter is currently closed due to the virus.

MT

5 fish between 17 and 19lbs?! That's truly amazing. Would love to see a picture of the viper head you mentioned. Would it be safe to say that the presentation you described is only possible to with that head?
Thank you for sharing that.

MT

I've seen the research boats several times over the years and they don't drag their nets where you would expect a largemouth to be. It's probably a good thing they don't. For all we know they'd say there's too many bass and they have to go.

MT

A much more reasonable approach than last March.

MT

I honestly don't know if my region is under a stay at home order or not. Nothing seems any different when I'm out and about. Doesn't affect me either way but I really hate it for the folks who are being told they can't make a living. Hopefully something changes fast for the better.

MT

Haven't read the list yet. Is rioting and looting still ok?

Search found 799 matches

Tags

Notice