Bass Fishing Forum - Westernbass.com

Tony M

I have two Lowrance HDS-12 dust covers for sale. These will fit Gen-2 models only. Can be modified for Gen-3 and Carbon. Brand new. $15.00 each. Pick up in Yuba City or you pay shipping/Pay Pal

Tony M

There is a used one on this site.

Tony M

Looking for a 24 pitch Fury in good condition. For 250 Pro XS.
Tony-(530) 559-4479

Tony M

LGC 3000 in good working order. $50.00 cash. Hand in hand. located in Yuba City.

Still Available

Tony M

LSS-1 Module, power cord, ethernet cable and transducer. Just took it off my boat.
It works well with no issues. $60.00 cash, hand to hand or you pay shipping.
Located in Yuba City.

Still Available

Tony M

Will the flush mount bracket that Lowrance sells for the Totalscan fit the Active Imaging Transducer?

Tony M

mark poulson wrote:3M 90 spray adhesive.

Thanks Mark.

Tony M

What kind (Brand) of adhesive is best to reattach the rubber step pad on a Ranger fiberglass fender? I used carpet glue and it didn't work to well. Thanks.
Tony

Tony M

Brand new, still in the box, Totalscan all-in-one transducer.
SOLD. Cash, hand in hand. Located in Yuba City.

Tony M

What is the model # of the transducer?

Tony M

BoujeeBassin wrote:I am also looking for one if anyone else has another!

You have a PM.

Tony M

I sent you a PM

Tony M

Can you program a Carbon to read the shoot through the hull sonar and not the 3 in 1 transducer?

Tony M

In what application would you use the 2 in 1 vrs. the 3 in 1 transducer?

Tony M

I've had mine for four months now. I do get a slight shaking at low speeds, 1 thru 3. It also vibrates more at higher speeds than my Fortrex did. Not totally happy with it. I do like the spotlock feature. Tony Mello Looks like I have a bad armature. It is in for repair and under warranty. That expl...

Tony M

I've been throwing an A-rig a lot this new year using 3/16 and 1/4 ounce heads. My main rig has been the Yum flash mob junior and a Dobyns Champ 794sb Rod. I used to throw the 795sb Rod and have found that the 794 has an over all better feel for this set up. Casts a mile to and drives the hook. I a...

Tony M

I mounted a Totalscan on my Ultrex. It works great. You will need an adapter to fit the transducer to the bottom of the trolling motor. You can order the adapter from Comfortroll.

Tony M

Devon8604 wrote:
Tony M wrote:I've had mine for four months now. I do get a slight shaking at low speeds, 1 thru 3. It also vibrates more at higher speeds than my Fortrex did. Not totally happy with it. I do like the spotlock feature.
Tony Mello
Are you using an eliminator prop nut?

Yes, I’m using the eliminator prop nut.

Tony M

JMV wrote:
Tony M wrote:I've had mine for four months now. I do get a slight shaking at low speeds, 1 thru 3. It also vibrates more at higher speeds than my Fortrex did. Not totally happy with it. I do like the spotlock feature.
Tony Mello
Has it had that vibration from day one of owning the unit?

Yes

Tony M

I've had mine for four months now. I do get a slight shaking at low speeds, 1 thru 3. It also vibrates more at higher speeds than my Fortrex did. Not totally happy with it. I do like the spotlock feature.
Tony Mello

Tony M

Hi Nick, You want to mount it as close to the transducer that you will be using. If you are reading the rear transducer, then mount it at the rear of the boat. Your reading will be more accurate that way.
If you are matching it to the trolling motor transducer, then mount it on the front.
Tony Mello

Tony M

What were you running it on?

Tony M

Lowrance HDS-12, Gen. 2. In good condition. Screen and case is in excellent condition.
No scratch's or dings. Deliver hand to hand or Pay Pal. (Yuba City). $975
(530) 559-4479. Tony

Tony M

Tony M wrote:Will the totalscan transducer work with a Gen-2 touch?

I got a yes from one person and a no from another. Can Ken or EDD chime in on this please.

Tony M

Will the totalscan transducer work with a Gen-2 touch?

Tony M

"SOLD"

Tony M

What is the difference between the active imaging three in one and the Totalscan transducers? Will the active imaging work with a carbon unit?

Tony M

Where is the best place's to purchase molds and supplies for pouring plastic worms? I poured several years ago, but I don't have that information any longer.
Thanks!

Tony M

Thank You for sharing.
This will help others to understand what they are seeing on their graphs.

Tony M

Tony M

Got it connected. Now trying to find the Go Free App. How do you get it?

Tony M

Where do you get the Go Free App. for an iPad? I've looked in the app. store, can't find.

Tony M

Found the problem. The male plug from the charger was bad. The wires were connected enough to get a voltage reading but would not carry the required amperage to the charger. Installed a new male plug and all is good. Good thing I didn’t take Dual Pro’s advice and buy a new charger.

Tony M

I had an issue with a Dual Pro 4-5 years ago, had my dealer (C&C Marine) check it out and they ended up getting a new replacement from Dual Pro at no charge. I know all circumstances are different, but I would reach out to your local dealer for a little help / advice. My boat is a 2008 Z-21. Th...

Tony M

Dual Pro wasn't much help. Their answer to the problem was, "Buy a new one". I haven't had much luck with Dual Pro over the years. When the Dual Pro failed in my last boat, I bought a Stealth 1 charging system. It worked great and it charges the trolling motor batteries on the run. The cos...

Tony M

I hooked up an external charger to the cranking battery thinking that the batteries may be two low for the dual pro to start charging. This is something that I have done in the past with a super low battery charge. After about two hours I got one red light to come on. That light was on the first ban...

Tony M

[quote][/quote]
I went to you tube and followed the instructions. The HDS won't show up on the iPad.

Tony M

I can't connect my iPad to my HDS-12 Carbon.
My iPad will not recognize the HDS-12 Carbon. The Carbon does recognize the iPad.
The Carbon is connected to my home network.
Can someone help with this?
Thanks, Tony

Tony M

When I plugged in 120 volt power all the lights came on and then they all went off.
Anyone have any ideas of what is wrong?

Tony M

Did you check with Dan @ Reel X

Tony M

What brand reels are they Rod. How old are they?

Tony M

Selling Fortrex, upgraded to Ultrex. In excellent condition, looks new.
Will not ship. Willing to meet halfway within 100 miles or so.
Located in Sacramento area. (SOLD)
Call Tony (530) 559-4479

Tony M

Bass Pro Shops 100 mph Jacket and Bibs For Sale. Used one time.
Size is XL. They are in perfect condition.
"SOLD"
Call me @ (530) 559-4479
Tony

Tony M

The cable that plugged into the HDS Gen-2 fit into the receptacle on the Carbon. I saw an older post that said to check the source. I found that I had "This Unit" selected. When I selected source it recognized the LSS-1. I selected that as the source and it seems to be working now. Haven't...

Tony M

Went to Bullards Bar yesterday. The Ultrex is awesome. One of the best upgrades I have done.
Thanks Guys for all the help!

Tony M

Just bought a Ranger with an HDS-12 Gen-2 @ the console and an HDS-12 Carbon on the bow. Boat has an LSS-1 structure scan installed on the transom. Structure scan worked on the first trip out @ the console. I switched and put the Carbon @ the console and the Gen-2 @ the bow. On a fishing trip today ...

Tony M

So that means you don’t need a sonar puck and LSS on the trolling motor? Totalscan will do both?

Tony M

What does the Totalscan do, that the LSS-2 can't do?

Tony M

Got it installed. It went real well. Can't wait to get on the water.

Tony M

Thanks Rich. That answered the question.

Search found 273 matches

Tags

Notice