Bass Fishing Forum - Westernbass.com

Tony M

Where are you located? What brand motor?

Tony M

I installed the software patch and it works great now.

Tony M

Sent you a PM.

Tony M

Check with Anglers Marine in Anaheim. I got a great deal from them.
It was worth the drive and their service is top notch.
Tony Mello

Tony M

Tony M wrote:13 Fishing, Concept 3Z. Right hand, 7.3:1 gear ratio.
In perfect condition. No scratches or rash. Box included.
$200.00 plus shipping or pick up in Yuba City. Cash or Pay Pal.
Tony. (530) 559-4479

Tony M

Who is the Mercury Rep. for Northern California and how do I contact him?

Tony M

Right hand, 7.3:1 gear ratio.
In perfect condition. No scratches or rash. Box included.
SOLD

Tony M

Johnsons Bait & Tackle in Yuba City has cured and uncured salmon roe.

Tony M

What will it fit?

Tony M

PM Sent

Tony M

The Sugar Barge RV Park on Bethel Island has a boat launching service. Nice park that has a launch ramp, resturant and store. They have tractors that will launch your boat.

Tony M

I complained about the shipping with GLS a Month or so ago. On a good note the last three shipments have been on time and were not lost. My last shipment arrived the very next day, Excellent! Looks like the issues have been resolved. Just wanted to say my complaint was not with TW, but GLS. All good...

Tony M

I would go to Lauritzens if I were launching in Antioch. It is much more secure there. The Sheriff Marine Division also has an office there. Its a good ramp and normally quiet. Get off 160 at the Hiway 4 exit then take a left on Bridgehead Road, then right on Lauritzen Road. Staff is also friendly t...

Tony M

Just a follow-up with my issue with the Carbon HDS-12. Lowrance replaced it with a brand new HDS-12 Live with a 3 in 1 transducer. There were no questions asked.

Tony M

Is there access to Berryessa yet? If so, what ramps are open?

Tony M

Thanks Edd. Got it ordered.

Tony M

I have upgraded from a Carbon to a Live unit. The carbon had a 7 pin connector for the shoot thru the hull transducer. The live has a 9 pin connector. Does anyone have the part# for the adapter cable. I ordered Part# 000-12571-001, but it is a 7 pin male to a 9 pin female. I need a 7 pin female to a...

Tony M

I'm looking for the metal grease caps that replace the plastic caps that fit the Vortex hubs. There was a post on here a few Months ago with information on someone that made these. Doe's anyone know the source for these?

Tony M

I could not get the issue fixed. I sent it in to Lowrance for repair/replacement. Unit is within the two year warranty.

Tony M

Tony M

Is the cursor showing up at the same location on the screen each time? At the least, I would backup my waypoints, routes, etc. and then perform a hard reset to see if that fixes the issue. I did a soft reset and a hard reset. I also did a cursor calibration. Cursor is still showing up about every 3...

Tony M

I sent you a pm yesterday on the 23 pitch. Would like to purchase.
Tony (530) 559-4479

Tony M

PM Sent

Tony M

I'm looking to get the Panoptics Live Scope installed on my boat. I'm running Lowrance Carbon 12's bow and console. I'm only going to use the Garmin for the Panoptics only. What head unit should I get that is not on the high end? I would want at least a 10" screen. Echomap Ultra 106 is what I ...

Tony M

The least expensive would be Echomap ($899) but it only goes up to a 9in screen. The EchoMap Ulta ($1599) has 10" screen. However why not get the Lowrance Live sight. $1000 plus a 300 rebate and because you have the Carbon you would need the PSI-1. That's $299 plus a 100 rebate. For $899 and y...

Tony M

Marc wrote:Is the cursor showing up at the same location on the screen each time? At the least, I would backup my waypoints, routes, etc. and then perform a hard reset to see if that fixes the issue.

I think it is showing up in the same location every time. I’ll try the hard reset. Thanks.

Tony M

I'm looking to get the Panoptics Live Scope installed on my boat. I'm running Lowrance Carbon 12's bow and console.
I'm only going to use the Garmin for the Panoptics only. What head unit should I get that is not on the high end?
I would want at least a 10" screen.

Tony M

I agree with Gary Dobyns on the DC 794 SB rod. I throw 2-3 oz. swimbaits on it and the 10XD.
It handles the 10XD with ease. It gets my vote.
Tony Mello

Tony M

Edd wrote:Could it be you are just barely touching the screen? Doesn't take much.

No, not touching the screen. It will lock on a spot on its own. Happening every few seconds. As soon as I clear the courser it will lock on again in a few seconds.

Tony M

Carbon 12 keeps locking on the current location. I have to keep clearing the courser. Anyone know what the issue is?

Tony M

Two 10' Power Pole covers. Power Pole Brand. They are in new condition.
Will not fit if you have the RMP light attached. $75.00 Pay Pal or cash.
Tony (530) 559-4479. Pick up in Yuba City.

Tony M

Sonny's Electric Marine in North Highlands. (916) 487-3868
He did excellent warranty work on my Ultrex for me.

Tony M

I asked you to call me. Did you call?
Tony
(530) 559-4479

Tony M

Call me
(530) 559-4479

Tony M

I have the original seats and center fold down seat from my '08 Ranger Z-21. Seats are worn but no damage or tearing to foam support under. They need new skins. Other than the wear on the seats, they are in good condition. Skins are available from Ranger parts. I need these gone $150.00 for all. Pic...

Tony M

Where can you find gas with no ethanol?

Tony M

No problem with Tackle Warehouse. They have been very good Over the years and when these orders went missing, they replaced immediately. Just questioning the new shipping company.

Tony M

It’s no longer GSO. They were bought out by another shipping company. I have been ordering for over 8 years and have never had an issue, until recently. I realize shipping will probably take longer now, but to loose two orders out of three is not acceptable.

Tony M

Tackle Warehouse has used Golden State Overnight shipping for some time. They did a very good job of getting the product out in a timely manner. Golden State has been bought out by another company recently and the shipping has been terrible. I don't mind taking a little longer with the Covid thing g...

Tony M

For Sale, New, never installed center coin box. Ordered for my '08 Z-21.
Call if interested. Located in Yuba City, CA
(530) 559-4479. (SOLD)
Tony Mello

Tony M

Braggs Marine in Anderson, CA. They do excellent work. They applied a new gelcoat
to an older Ranger that I had. It came out like it was new again. braggsmarine.com

Tony M

Bob's Machine Shop manual jackplate. Just took off my boat. In good shape.
$175 OBO. Call or text: (530) 559-4479. (SOLD)
Tony

Tony M

Is Ladds open?

Tony M

Still available?

Tony M

For Sale. Mercury Torque Master lower unit, gen-1. It is currently on a 2008 250 Pro Xs. Unit is in great condition.
Have had no problems with it. Does not include prop. Re-powering to a four stroke engine.
Tony
(530) 559-4479

Tony M

For Sale. Mercury Torque Master lower unit gen-1. It is currently on a 250 Pro Xs. Unit is in great condition.
Have had no problems with it. Does not include prop. Re-powering to a four stroke engine.
Tony
(530) 559-4479

Tony M

Still available

Tony M

Yes, still available.

Tony M

Vortex hubs are the way to go.

Tony M

Search found 273 matches

Tags

Notice