Search found 330 matches

by bustout
Tue Apr 18, 2017 7:15 am
Forum: Rods & Reels
Topic: sold .....Dobyn's Fury 702SF spinning rod
Replies: 1
Views: 642

sold .....Dobyn's Fury 702SF spinning rod

New condition. Used only 1 outing. New $109....make offer
by bustout
Tue Apr 11, 2017 2:08 pm
Forum: Fishing
Topic: bass pro shop reels
Replies: 4
Views: 1252

bass pro shop reels

Does anyone know which company makes them. Are they good reels?
by bustout
Tue Apr 11, 2017 6:36 am
Forum: Fishing
Topic: Baitcaster reel
Replies: 5
Views: 1438

Re: Baitcaster reel

If you watch eBay . Reels can be had for far less than some stores. Revos stx's were going for less than $100 for 7to 1 new in box. Other Brands were close. BUT watch for scams. I would stick with Tackle Warehouse catch one of their sales and be sure to get their MIL. discount if you were in the se...
by bustout
Mon Apr 10, 2017 9:56 am
Forum: Rods & Reels
Topic: Dobyn's fury 702 spinning rod
Replies: 1
Views: 650

Dobyn's fury 702 spinning rod

paid $109. make offer. New condition...used for only 1/2 hr.
by bustout
Mon Apr 10, 2017 8:30 am
Forum: Fishing
Topic: Baitcaster reel
Replies: 5
Views: 1438

Baitcaster reel

Hi All,
Looking to get a new baitcaster. My last one was the old green curado and it was great so I was assuming to buy a new curado. The curado is $149. I was hoping to get something a little lighter, can anyone recommend one?

thanks in advance
by bustout
Mon Mar 27, 2017 12:02 pm
Forum: Fishing
Topic: Ranger trailer axle issue
Replies: 11
Views: 12695

Re: Ranger trailer axle issue

I am in stockton....
thanks
by bustout
Mon Mar 27, 2017 10:10 am
Forum: Fishing
Topic: Ranger trailer axle issue
Replies: 11
Views: 12695

Ranger trailer axle issue

Hi Everyone, I recently purchased a 2006 Ranger boat where the trailer tires had extreme wear on the inside tread. I went to replace tires as tread was starting to show on the inside....all other tread was 70-90% still there. When the new tires were installed (same size), they rubbed on the inside f...
by bustout
Sat Mar 04, 2017 8:11 am
Forum: Fishing
Topic: McClure conditions
Replies: 1
Views: 791

McClure conditions

Anyone been to McClure and can tell about water clarity, temp how the bite is? Thinking either camanche oe mcclure ...what is fishing better right now
by bustout
Mon Feb 27, 2017 9:15 am
Forum: Fishing
Topic: tiki vs turner cut launch ramps
Replies: 6
Views: 1683

tiki vs turner cut launch ramps

Anyone launch at both of these places? Which is better? I have launched out of tiki many times and the thing to watch is the ramp ends and can be an issue at low tide. Was wondering if turner cut launch was any better also, is this section closed? I wanted to fish the mildred area thanks in advance
by bustout
Fri Feb 24, 2017 11:13 am
Forum: Fishing
Topic: Where to buy Dobyn's rods
Replies: 7
Views: 1687

Where to buy Dobyn's rods

looking for a 701 or 702 in the Sierra series. Most places only carry the fury and champion series

thanks
by bustout
Fri Feb 17, 2017 9:19 am
Forum: Fishing
Topic: prop for merc and yamaha
Replies: 1
Views: 576

prop for merc and yamaha

Can u use a mercury prop on yamaha? I have a merc hi five prop that was from a 200 efi merc . i now have a150hp 4str yamaha. If the splines line up am i good to go?
by bustout
Thu Feb 16, 2017 9:03 pm
Forum: Fishing
Topic: minn kota us2 issues with lowrance
Replies: 3
Views: 1791

minn kota us2 issues with lowrance

Hello everyone,
I have a hook3 lowrance connected to a universal minnkota transducer and it often loses track of the bottom. Most times it eventually comes back but it is not acceptable. Is there a fix or is the fishfinder defective?
by bustout
Thu Feb 16, 2017 8:52 am
Forum: Used Boats - Motors - Trailers
Topic: WANTED - Tandem axle Ranger Trailer
Replies: 1
Views: 945

Re: WANTED - Tandem axle Ranger Trailer

Is it the same make/model axle that you replaced? What problems have you had? bearings? I just bought a 2006 w/ single axle (6 lug) and just changed over to vortex grease hubs (from oil bath). It seems that Ranger has had many problems with oil bath hubs from 2005 to 2014. New ones are back to greas...
by bustout
Tue Feb 14, 2017 10:44 am
Forum: Fishing
Topic: Anyone fish Camanche over the weekend?
Replies: 4
Views: 1226

Anyone fish Camanche over the weekend?

Did you do any good? Any tips? I heard that the river arm is very muddy whereas the rest of the lake is pretty clear. Also, it has risen about 20ft in the last 2 weeks. Shall I focus deep on existing structures or fish newly flooded areas

thanks in advance
by bustout
Fri Feb 10, 2017 9:57 pm
Forum: Fishing
Topic: Ultrex vs Fortrex?
Replies: 6
Views: 4431

Re: Ultrex vs Fortrex?

It is also cable steered
by bustout
Fri Feb 10, 2017 9:55 pm
Forum: Fishing
Topic: Ultrex vs Fortrex?
Replies: 6
Views: 4431

Re: Ultrex vs Fortrex?

The ultrex has adjustable pedal tension/resistance to your preference
by bustout
Fri Feb 10, 2017 8:26 am
Forum: Fishing
Topic: Ultrex vs Fortrex?
Replies: 6
Views: 4431

Re: Ultrex vs Fortrex?

ditto on the Ultrex. Its the best trolling motor I have ever had. Best of both worlds...power assisted cable control and the ability to control with remote. Spot lock and jog (move over x feet at the touch of a button) features are amazing. Also it can link with fish finders charting (works with cer...
by bustout
Tue Feb 07, 2017 4:37 pm
Forum: Fishing
Topic: changing from oil bath to grease hubs
Replies: 10
Views: 13122

Re: changing from oil bath to grease hubs

Received new vortex hub from ranger and it has a diiferent diameter cap. The hub seems to be smaller too. Part #'s are different. Called around and it seems that there are 3 generations of vortex hubs and i may have 2 on my single axle trailer. What sucks is that i will probably need different beari...
by bustout
Mon Feb 06, 2017 11:35 am
Forum: Fishing
Topic: Boat trailer coupler lock
Replies: 6
Views: 1454

Boat trailer coupler lock

Hi Everyone,
I am looking for a coupler lock which would replace the non locking pin that was supplied with my trailer. Anyone able to find a locking pin for this?

A link to a picture for my style of coupler is below:
http://www.etrailer.com/Brake-Actuator/ ... 39120.html

thanks in advance
by bustout
Wed Feb 01, 2017 1:37 pm
Forum: Fishing
Topic: changing from oil bath to grease hubs
Replies: 10
Views: 13122

Re: changing from oil bath to grease hubs

Mike,
Did you have a 1 piece or 2 piece disc brake assy. ?
Did you have to replace the spindle too? Ranger said I had to as the spindle/grease seal wont work on the oil version

thanks
by bustout
Wed Feb 01, 2017 10:23 am
Forum: Fishing
Topic: changing from oil bath to grease hubs
Replies: 10
Views: 13122

changing from oil bath to grease hubs

I have a 2006 Ranger trailer with oil hubs. Ranger said they don't carry any oil hub replacement parts and are recommending me to change over to grease when my maintenance interval is up. They also said I have to change out the hub and spindle with a grease version. Some trailer places say you can j...
by bustout
Fri Jan 27, 2017 9:43 am
Forum: Fishing
Topic: minnkota ultrex
Replies: 3
Views: 858

Re: minnkota ultrex

My concern is can you control without always having to look at the dial on top of the motor? With cable, I can memorize my foot position and this is how I know which direction it will go. Another way to explain this is when you fully push down on the toe of the pedal, the steering is pointing the fu...
by bustout
Thu Jan 26, 2017 4:29 pm
Forum: Fishing
Topic: minnkota ultrex
Replies: 3
Views: 858

minnkota ultrex

Anyone have an ultrex? How is the steering compared to a cable control?
by bustout
Thu Jan 26, 2017 4:26 pm
Forum: Fishing
Topic: Minnkota Ulterra trolling motor
Replies: 2
Views: 795

Re: Minnkota Ulterra trolling motor

Sorry i meant the ultrex
by bustout
Thu Jan 26, 2017 2:14 pm
Forum: Fishing
Topic: Minnkota Ulterra trolling motor
Replies: 2
Views: 795

Minnkota Ulterra trolling motor

wanted to get feedback on this trolling motor. I never liked the motorized control and they say this one controls like cable but pedal movement is much easier to move. Also, has many GPS/control features.

Thanks...wanted to do some research before I went out and buy one
by bustout
Thu Jan 19, 2017 9:44 am
Forum: Fishing
Topic: boat carpet install
Replies: 1
Views: 602

boat carpet install

can anyone recommend a good and fair priced shop which does bass boat carpet? preferably near stockton but willing to drive out of town

thanks
by bustout
Mon Jan 16, 2017 1:40 pm
Forum: Used Boats - Motors - Trailers
Topic: 1988 Ranger 375V Sold
Replies: 4
Views: 1953

Re: 1988 Ranger 375V

where is it located?
does it have a seat mount in the center (3 total) ?
can you send more pics? thanks Jack
209 481 7174
or
riberal@yahoo.com
by bustout
Fri Dec 23, 2016 12:02 pm
Forum: Used Boats - Motors - Trailers
Topic: wanted: fish and ski bass boat
Replies: 5
Views: 1043

wanted: fish and ski bass boat

full windshield
tow bar
19 - 21 ft

thanks
by bustout
Mon Nov 28, 2016 11:18 am
Forum: Used Boats - Motors - Trailers
Topic: marine canvas
Replies: 1
Views: 431

marine canvas

Anyone know of a good marine canvas shop near stockton? My boat cover needs to be replaced as it is worn and leaks.

thanks
Jack
by bustout
Thu Nov 03, 2016 6:37 pm
Forum: Fishing
Topic: CA Delta Road Access from Tiki/Turner Cut
Replies: 2
Views: 960

Re: CA Delta Road Access from Tiki/Turner Cut

That road to Tiki has always been like that. In the last 20 years or so, I remember once where they re-paved the road but it was only smooth for about 1 season. Same goes for hwy 4 from stockton to inland drive....they have re-paved it a few times over the last decade or so and it doesn't last long....
by bustout
Tue Jul 19, 2016 9:41 am
Forum: Used Boats - Motors - Trailers
Topic: SOLD
Replies: 2
Views: 1604

Re: 1999 Champion 191 with 200 Evinrude Fitch

Please text pics to 209 481-7174
by bustout
Thu Dec 17, 2015 11:10 am
Forum: Fishing
Topic: is mcclure open? launch ramp condition?
Replies: 2
Views: 786

is mcclure open? launch ramp condition?

Is mcclure open? What are launch ramp conditions?
by bustout
Tue Mar 04, 2014 8:47 am
Forum: Fishing
Topic: friend from ORE in town...Delta or Melones?
Replies: 6
Views: 1713

friend from ORE in town...Delta or Melones?

Hi Everyone,
I have a friend in town from ORE and he wants to go bass fishing. I haven't been out this year yet. With the recent rains, would the delta or melones be our best option? Just looking to fun fish, which place has best chance to catch fish, qty. over quality. thanks in advance
by bustout
Mon Jul 08, 2013 12:38 pm
Forum: Fishing
Topic: Looking for a gator mount
Replies: 6
Views: 1490

Looking for a gator mount

Anyone have a motorguide gator mount for sale? thanks in advance
by bustout
Thu Jan 10, 2013 1:21 pm
Forum: Fishing
Topic: best route to Mclure from stockton
Replies: 2
Views: 617

best route to Mclure from stockton

hwy 132 or keyes rd ?

thanks in advance
by bustout
Wed Dec 19, 2012 10:03 am
Forum: Fishing
Topic: trailer tires. bias vs radial
Replies: 9
Views: 3245

trailer tires. bias vs radial

which is best for towing a tandem axle boat trailer?

can you run bias on 1 axle and radial on the other?
by bustout
Tue Sep 04, 2012 1:42 pm
Forum: Fishing
Topic: Bedliner coating for boats
Replies: 13
Views: 3347

Bedliner coating for boats

Anyone use bedliner coating for the bottom interior of the boat in place of carpet or marine vinyl flooring ?

Aside from the black color, looks durable.

any one know of problems going this route?

I have seen it in bare aluminum boats, but how about on wood floor of an aluminum boat?
by bustout
Wed May 09, 2012 6:19 am
Forum: Used Boats - Motors - Trailers
Topic: WANTED 2.5 hp outboard motor short shaft
Replies: 3
Views: 885

Re: WANTED 2.5 hp outboard motor short shaft

I have a 2.5hp 4stroke yamaha. new carb, looks and runs like new
209 481-7174 ,$500
by bustout
Fri Aug 26, 2011 6:11 am
Forum: Fishing
Topic: Delta Colors - Dark or Light
Replies: 11
Views: 2350

Re: Delta Colors - Dark or Light

I use 2 basic colors, junebug and watermelon in all my plastics. I use both all day and a catch fish....most days 1 works better than the other.....I probably use junebug 70% of the time since I fish dawn to noon or 3pm to dusk as there is some darkness in sun up or sun down.
by bustout
Tue Aug 23, 2011 2:47 pm
Forum: Electronics
Topic: Hummin bird fish finder matrix 25 100$
Replies: 1
Views: 1142

Re: Hummin bird fish finder matrix 25 100$

do you still have it?

why are u selling it? is there anything wrong with it?

where are u located?

thanks
Jack
209 481-7174
by bustout
Fri Aug 19, 2011 6:06 am
Forum: Fishing
Topic: Stipers in Lake New Hogan
Replies: 2
Views: 668

Re: Stipers in Lake New Hogan

everthing I have heard so far is that very little top water action so far this summer due to the cooler summer we are having. i have been out water sporting w/ kids several times this summer from noon to dusk and not once have I seen a boil? previous years you can count on seeing a couple of boils m...
by bustout
Mon Aug 08, 2011 8:06 am
Forum: Fishing
Topic: Need help 89 200hp yamaha tilt/trim
Replies: 0
Views: 283

Need help 89 200hp yamaha tilt/trim

anyone know who can fix a tilt/trim problem? I pulled out of the water and my tilt would barely go up and then when getting home, it won't go up or down. there is a motor sound when you press the switch to tilt op or down. most shops are busy. have a camping trip this weekend and would like to get i...
by bustout
Tue Jul 26, 2011 12:08 pm
Forum: Fishing
Topic: best nite fishing: Pedro, McClure or Melones
Replies: 3
Views: 880

best nite fishing: Pedro, McClure or Melones

going out this sat evening (4pm to about midnite). Which lake is best and where to launch so that you dont have to run long distances in the dark

thanks in advance
by bustout
Tue Mar 29, 2011 11:33 am
Forum: Fishing
Topic: delta water temps
Replies: 4
Views: 918

delta water temps

anyone know what the water temps are in the franks and mildred areas?

thanks in advance
by bustout
Wed Mar 23, 2011 6:37 am
Forum: Fishing
Topic: Replacement for keeper/wrights bait worms
Replies: 8
Views: 1886

Re: Replacement for keeper/wrights bait worms

Great news if they are still in business....thanks for the update to all

I was told this by Outdoor Sportsman in Stockton. They had a clearance/closeout on keeper/wrights worms and that is what they told me
by bustout
Mon Mar 21, 2011 12:33 pm
Forum: Fishing
Topic: Replacement for keeper/wrights bait worms
Replies: 8
Views: 1886

Replacement for keeper/wrights bait worms

Found out that they are going out of business. Anyone know of a similar make worm? I use their 4" and 6" strait tail, especially in the original green weenie and purple ghost colors

Looking to find an alternate brand...

thanks in advance
by bustout
Thu Mar 03, 2011 3:50 pm
Forum: Fishing
Topic: Whiskey Slough Harbor
Replies: 2
Views: 715

Re: Whiskey Slough Harbor

it used to be unsafe....I had my trailer tire AND spare punchured w/ a knife one time. This was several years ago. I tried to go last year but it didnt open until 8am and the cost was $15. I won't be going there anymore as a result. If you go there, be careful as the ramp ends.....at low tide can be...
by bustout
Thu Feb 24, 2011 7:48 am
Forum: Fishing
Topic: 2 pos battery switch frying motor electronics
Replies: 1
Views: 555

2 pos battery switch frying motor electronics

I have read several times on this forum that if you have a Perko 2 pos switch and are switching between batteries or truning off while the engine is running would fry the motor's electronics...For years on all my boats, I would have the switch in the position which has the stronger battery to crank,...
by bustout
Mon Jan 24, 2011 6:07 am
Forum: Miscellaneous
Topic: wanted: trolling motor mount
Replies: 3
Views: 665

wanted: trolling motor mount

for a motorguide trolling motor....i have one without a mount
thanks