Bass Fishing Forum - Westernbass.com

mmalinao

Damn! OK, thanks

mmalinao

Does anyone know what size rods the rod locker holds?

Thanks,

Mike

mmalinao

Hey guys, Just wanted to see if anyone has fished out of either the Ranger 212LS Reata or the Allison XB-21 2+2? If out of the 212LS how many rods can you store in the center compartment? Online it doesn't look like many will fit. The Allison XB-21 2+2 sounds amazing, but never even seen one around ...

mmalinao

Thanks everyone!

mmalinao

Thanks Jim. So you saying to add an additional ground wire to the motor mount? Would that be inside the compartment or run it outside?

-Mike

mmalinao

Hey guys, My Motorguide 109 died on me and I picked up a used (really good condition) Minn Kota Maxxum 101. Install went well, got it in the water to test, and noticed that every time I hit the button I noticed a big time interference with my Lowrance HDI 7. Now, this is not the built in transducer....

mmalinao

Hey guys, My Motorguide 109 died on me and I picked up a used (really good condition) Minn Kota Maxxum 101. Install went well, got it in the water to test, and noticed that every time I hit the button I noticed a big time interference with my Lowrance HDI 7. Now, this is not the built in transducer....

mmalinao

Hey guys, lost my net on my last Delta trip (chop was so bad it fell out even strapped down). Any recommendations on which one I should replace with? Thanks

mmalinao

Hey guys, lost my net on my last Delta trip (chop was so bad it fell out even strapped down). Any recommendations on which one I should replace with? Thanks

mmalinao

Hey guys, I bought one

Thanks, Mike

mmalinao

It looks like because of the hatch you can't install a recessed tray, is that correct? Thanks

mmalinao

Thanks guys, but from what I understand the fin helps with steering under power right? I have manual steering so I don't want to make it any more difficult, but you're right I could take the fin off and test run it to see the difference.

-Mike

mmalinao

Hey guys, I bought this prop about a week ago here from another WB'er, but I did not measure correctly and it's too big (hitting the anode fin). I was replacing a 25P 4 blade Trophy and just assumed it would fit. Prop is in good shape, small ding on one blade and a scuff on another (mechanically sou...

mmalinao

How many 201e7's are still available, I'll take the rest. Paypal?

mmalinao

Thanks babybass! Really appreciate the offer. After consulting a few people, I don't believe what I experienced was a hub related. I know it sounds weird, but I'm going to run it as is on Saturday (worst case, run the trolling motor) and see if I can find out the issue. What happened on Sunday was I...

mmalinao

Thanks guys! My current prop is a 4 blade Trophy 24P and it's a bit banged up, but your absolutely right a hub kit is a cheaper solution.

mmalinao

Hey guys,

I believe I spun my hub yesterday. I say believe because I was able to go again after stopping. I have a tournament on Saturday so hoping someone here has one (somewhat local, I'm in Morgan Hill) that they want to sell. I have a 175 Merc Xri.

PM or call/text 408-859-1971.

thanks,

Mike

mmalinao

Looking for an iRod Large Swim in great shape. PM me, thanks

Mike

mmalinao

Thanks guys. Jack, just so I'm clear. You have your batteries connected in series and have the battery charger connected to each battery and you don't have to disconnect the charger cables when running the trolling motor?

Thanks,

Mike

mmalinao

Hey guys, I apologize if this has been asked before, but I'm trying to figure out the best way to charge my system. I'll start out by stating that I used to have my boat in a storage yard and had to remove all batteries, bring them home, and charge them. I recently moved and now have my boat in my d...

mmalinao

Thanks guys! I believe it's connected at the front and there might be a voltage issue. I planned on investigating it this past weekend, but the other chores didn't allow me to.

-Mike

mmalinao

Hey guys, I might need to get a new fish finder, it has been turning off on it's own while I'm running for some time now and the last trip wouldn't turn on at all. I'm going to check the voltage and the wiring this weekend, but if it is toasted and I need to get another one I have some questions. I ...

mmalinao

I landed 2 on Sunday with the Tactical Shad!

mmalinao

mmalinao

Thanks. That was my buddy and my first tournament, we sucked, and just wanted to see how bad..LOL

mmalinao

Is there a link for the results?

Thanks,

Mike

mmalinao

I'm not sure if I read that right, but are you saying HDS5 with LSS1 for $599?

mmalinao

Awesome man!

mmalinao

Sent payment this AM.

Mike

mmalinao

Thanks guys!

mmalinao

I did a guide trip with Matt in March and I can't tell you how much I learned from him! He's the real deal and put me on giants! I would strongly recommend him if anyone is interested in a guide trip!

-Mike

mmalinao

Hey guys, I have an older boat (95 Skeeter 175 Merc motor) w/o hydraulic steering and I had a couple of questions. I know most would say not to add it as you're not going to see your money back if I was to sell it, but I just had my first child and I'm just thankful I still have a boat LOL! That bei...

mmalinao

Powell sold

mmalinao

Sorry, I'm in the south bay.

mmalinao

Hey guys, It's that time of year where I need to sell a couple of rods! Both rods are lightly used and in good shape! St. Croix Premier 7 ft medium moderate fast glass crankbait rod (80$) Powell 735 Frog Rod (I used it for 6" Punkers, A-Rig, as well as Frogs) ($95) Email me @ mike_malinao@yahoo...

mmalinao

I wouldn't be interested in any other rod or the older series.

Thanks,

Mike

mmalinao

How about a St. Croix PC70MM (http://www.basspro.com/St--Croix-Premie ... 4391/76024) and $20?

It's a great rod and I caught my PB Crankbait fish on it, (9.2).

Mike (mike_malinao@yahoo.com)

mmalinao

Wow, awesome!

mmalinao

I plan to do quite a few trips this summer and will be leaving my boat in slips at the Delta and maybe a few other places.

I came across the Loc-R-Bar wanted to see if anyone has one on their boats and if you like it/worth it?

Here's the site:

http://www.locrbar.com/products.htm

Thanks,

Mike

mmalinao

Thanks guys. I will repost when I get back and let you guys know how it was.

-Mike

mmalinao

Wow, I'm so jealous!

-Mike

mmalinao

That's great news, thanks!

mmalinao

Hey guys, I'm headed out there for Memorial Day weekend with friends and their families. I've never been there it looks like a trout lake because that's all the info I could find, but it does say bass on the site. I'll be driving my RV and with the gas prices the way they are, if there's no bass bit...

mmalinao

Thanks Ash, I'll check it out!

mmalinao

I'd be interested in seeing these up close as well. I have 96 Skeeter ZX190 and it doesn't really make sense to drop upwards of $2k on an anchor system as I'd never see that money back if I go to sell it and upgrade boats (which could be the case is a couple of years) so this system might be worth i...

mmalinao

Thanks everyone, this all makes sense. I have a punch rod so I'll stick with that one for heavy cover and use my 734 for creature baits, I think I need a 7'6"+ rod for jigs. As I mentioned I'm using my 754 Roumbanis frog rod, but in the summer I will be using this to throw frogs so I'll need to...

mmalinao

Makes we want to get out there!!

mmalinao

Hey guys,

I pitch way more than I flip and wanted to know what you all look for in a flipping/pitching rod? I mainly for the Detla and South Bay lakes and have used my Dobyns 734 as well as my IROD Frog rod. Any advice would be great.

Thanks,

Mike

mmalinao

FYI, You're picture links don't work.

mmalinao

and a 301e7!!

Search found 190 matches

Tags

Notice