Page 1 of 1
MinnKota ULTREX help/advice?
Posted: Sun May 20, 2018 11:36 am
by riverguy225
Looking to buy a 36 volt ultrex.. I do not run humming bird electronics. What model ultrex do I buy? It looks like the one that costs more links with hummingbird graphs..? Am I understanding this right?
Additionally will my total scan just mount to the base of the motor?
Any help from guys who are in the know on these units would be greatly appreciated! Thanks!
Re: MinnKota ULTREX help/advice?
Posted: Sun May 20, 2018 11:45 am
by 185vsfrog
I would call tackle warehouse. I’m sure they can steer you in the right direction. They have great customer service and they carry the ultrex
Re: MinnKota ULTREX help/advice?
Posted: Sun May 20, 2018 5:31 pm
by Never satisfied
Contact hawg on here. He will take care of you and give you a good price.
Re: MinnKota ULTREX help/advice?
Posted: Sun May 20, 2018 6:26 pm
by kmah
riverguy225 wrote:Looking to buy a 36 volt ultrex.. I do not run humming bird electronics. What model ultrex do I buy? It looks like the one that costs more links with hummingbird graphs..? Am I understanding this right?
Additionally will my total scan just mount to the base of the motor?
Any help from guys who are in the know on these units would be greatly appreciated! Thanks!
You will want the 112 with Ipilot
This may help you install a long transducer. However all of the ultrex models that I have seen has the built in universal sonar thus making installing long SS type transducers Challenging or not possible.
http://www.tacklewarehouse.com/Comfortr ... COMLS.html
Re: MinnKota ULTREX help/advice?
Posted: Mon May 21, 2018 11:55 am
by riverguy225
Thank you fellas!
Ken, thanks for the heads up on the transducer!
Re: MinnKota ULTREX help/advice?
Posted: Mon May 21, 2018 9:23 pm
by scottsweet
The Ultrex has the internal 2D transducer built in. The i-pilot link version will only help if you have Humminbird electronics. Get the i-pilot version if you plan on only using Lowrance.
You might want to look in to the Transducer Shield/Saver to see if you can install the Lowrance transducer you want to use.
Ipilot Link allows you to control the trolling motor via the Humminbird graphs, especially follow the contour lines via Lakemaster maps. It will also allow you to store a track on the graph and then trace it on the trolling motor. Also, you can "go to waypoints" that are stored on your Humminbird electronics. However, these features are only available with Humminbird graphs.