Page 1 of 1
Wacky O-rings slipping off yum dingers
Posted: Thu Sep 19, 2019 11:31 am
by Hookset5
Topic says it all but dang, I lost 6 dingers yesterday but the o-ring was still on the hook. Smaller o-ring? size recommendation? or superglue?
Re: Wacky O-rings slipping off yum dingers
Posted: Thu Sep 19, 2019 12:18 pm
by WRB
Yes, smaller O-ring or glue it. Another option is use low temp shrink sleeve about 1/4 wide.
Tom
Re: Wacky O-rings slipping off yum dingers
Posted: Thu Sep 19, 2019 2:46 pm
by Whoopbass
Stick the hook through the bait. I can get around 10 fish per senko and my hook up ratio is excellent. Just make sure your bait doesn't flip around and ends up setting in the bend of the hook.
Re: Wacky O-rings slipping off yum dingers
Posted: Mon Sep 23, 2019 7:59 am
by Fishfreq
Anyone tried the Arsenal silicone band and plier setup? Looks cool BUT how does it really work?
https://arsenalfishing.com/product/wack ... tube-plier
Re: Wacky O-rings slipping off yum dingers
Posted: Mon Sep 23, 2019 6:17 pm
by Andrew5414
Under terminal tackle tko tungsten sells a bad to the bone set up. , it works excellent hands down worth the money.
Re: Wacky O-rings slipping off yum dingers
Posted: Tue Sep 24, 2019 3:57 pm
by BFerris
We carry a full line of these rings (XS-XXXL) and pliers! PM me or check us out at
www.TKOTungsten.com or check us out on Facebook!
Re: Wacky O-rings slipping off yum dingers
Posted: Wed Sep 25, 2019 7:56 pm
by mark poulson
Get some smaller O rings.
Re: Wacky O-rings slipping off yum dingers
Posted: Sat Sep 28, 2019 8:27 am
by Hookset5
Thanks for the replies. I did buy some smaller O-wacky rings, size #9 works.
Re: Wacky O-rings slipping off yum dingers
Posted: Mon Sep 30, 2019 8:49 am
by ash
Fish the Berkeley General - I dont have this issue
Also check out Frenzy Baits Wacky Saddle or just step down a size in your O-ring - I get mine at ACE two different sizes