Page 1 of 1
Need a New Trolling motor release rope/cord?
Posted: Thu Apr 01, 2010 1:38 pm
by Kevin Evans - Kap
Where can I pick up a new release cord for my Motorguide T motor?
West Marine said they could order me one, BUT... I want it a little quicker than that if'n I can get it.
Thanks in advance,
Kap
Re: Need a New Trolling motor release rope/cord?
Posted: Thu Apr 01, 2010 1:55 pm
by fishinman
i JUST TAKE A SAMPLE IN TOO A HARDWARE STORE AND BUY 9 FEET ONCE EVERY 2 YEARS. iTS JUST STIFF ROPE OF A PARTICULAR SIZE
Re: Need a New Trolling motor release rope/cord?
Posted: Thu Apr 01, 2010 2:08 pm
by ash
I used coated cable on my last TM, along with some small tubing so that it would rub and break any longer. You can make it yourself no problem
Re: Need a New Trolling motor release rope/cord?
Posted: Thu Apr 01, 2010 2:39 pm
by BassManDan
[quote="ash"]I used coated cable on my last TM, along with some small tubing so that it would rub and break any longer. You can make it yourself no problem[/quote]
That's a dang god idea

Re: Need a New Trolling motor release rope/cord?
Posted: Thu Apr 01, 2010 2:39 pm
by flipit
Chris Raza has the best ones for sale, they will never break. Cable in a plastic liner. Id suggest getting hold of him for a new cable.
Re: Need a New Trolling motor release rope/cord?
Posted: Thu Apr 01, 2010 2:46 pm
by big_limits
if everyone doesn't have a spare on their boat at all time i would suggest doing so. causes a headache that excedrine cant fix if you dont. you will need it one day i promise.
Re: Need a New Trolling motor release rope/cord?
Posted: Thu Apr 01, 2010 3:48 pm
by Smitty
If you use Raza's you wont need a spare. I think they are good to something like 250 lbs plus...probably more.
Smitty
*NM*
Posted: Thu Apr 01, 2010 3:56 pm
by blkdog812
*NM*
Re: Need a New Trolling motor release rope/cord?
Posted: Thu Apr 01, 2010 4:03 pm
by blkdog812
tuna cord, lawn mower starter, cord 100ft bulk at your local hardware store.
Re: Need a New Trolling motor release rope/cord?
Posted: Thu Apr 01, 2010 4:14 pm
by 2ndsuks
Smitty wrote:If you use Raza's you wont need a spare. I think they are good to something like 250 lbs plus...probably more.
Smitty
Actually way more than that, Dobyns uses one!

Re: Need a New Trolling motor release rope/cord?
Posted: Thu Apr 01, 2010 4:17 pm
by swordfish
Parachute cord from an army surplus store , you can buy it by the foot, can up the diameter for strength and wear and make spares.It also comes in many different colors and patterns.
Re: Need a New Trolling motor release rope/cord?
Posted: Thu Apr 01, 2010 5:12 pm
by Delaney
If you see guys pulling fiber-optic cable ask them for some of that white strapping they use to pull it I've had the same piece in use for at least 3 yrs. I was watching guys in front of the house and the guy asked me if I wanted some. He said they had to throw it away after they used it. He also said it would pull a car. It's 1/2" wide, soft, flexible, and cloth like. He gave me 75-100 ft. of it and if you can' t find it E-mail your address and I will send you some of it.
Re: Need a New Trolling motor release rope/cord?
Posted: Thu Apr 01, 2010 7:56 pm
by froteur
Delaney wrote:If you see guys pulling fiber-optic cable ask them for some of that white strapping they use to pull it I've had the same piece in use for at least 3 yrs. I was watching guys in front of the house and the guy asked me if I wanted some. He said they had to throw it away after they used it. He also said it would pull a car. It's 1/2" wide, soft, flexible, and cloth like. He gave me 75-100 ft. of it and if you can' t find it E-mail your address and I will send you some of it.
i would love some of this. if you still have some left, please send to:
perry seto
1450 el camino real
menlo park, ca 94025
happy to reimburse you for you cost.
thanks.
perry
Re: Need a New Trolling motor release rope/cord?
Posted: Thu Apr 01, 2010 8:02 pm
by ScottyJ
Just use some of the rubber coated steel braided cable you can buy from any hardware store. It'll be a one time deal, look good and never break.
Re: Need a New Trolling motor release rope/cord?
Posted: Fri Apr 02, 2010 5:19 am
by Riplip
Regardless of which rope/line you choose you may want to consider creating a spare to keep in the boat that has a small wire threader attached to one end. I have a 1/4 in diameter black rope about 30" long with a short threader attached to the end to make "on the water" replacment a snap. Once you have to do this you will understand why a wire threader makes it soo much eaiser.
Re: Need a New Trolling motor release rope/cord?
Posted: Fri Apr 02, 2010 5:41 am
by ash
Good call Rip - great advice....its a PIA on the water...
Re: Need a New Trolling motor release rope/cord?
Posted: Fri Apr 02, 2010 6:03 am
by keithcant
I don't need any--but THREE CHEERS FOR DELANEY....that's about the nicest thing I've seen on this site.
Now watch some guy will probably explain why he can catch 'em bigger and faster with his trolling motor cord the way he uses or wants it!
Re: Need a New Trolling motor release rope/cord?
Posted: Fri Apr 02, 2010 7:18 am
by krpierce
Yes Delaney that material is called Mule Tape, pretty much indestructible.
Re: Need a New Trolling motor release rope/cord?
Posted: Fri Apr 02, 2010 7:55 am
by 2ndsuks
The Raza cables are available at Capitol City Marine for $12.95.
Includes the whole kit and is simple to install, it will be the last time you will deal with a broken trolling motor rope!
Call Mike
916-729-0590
Re: Need a New Trolling motor release rope/cord?
Posted: Fri Apr 02, 2010 8:18 am
by ScottyJ
Also spray wd40 or oil on the release mechanism, spring etc. and that will help a lot with how hard u have to pull to get it to unlock so u can pull it up. That was how mine broke and darn near launched my butt into the water. After I retied it and sprayed it the thing is better than new.