Page 1 of 1
Need New Compressor
Posted: Mon Aug 30, 2010 7:57 am
by McLovin
So my partner needs a new compressor for his 2005 opti. Has anyone here had to replace there compressor. Is it something that can be done by us. He was quoted $1200. is this about right. Thanks
Re: Need New Compressor
Posted: Mon Aug 30, 2010 8:01 am
by JustinD
Jesse......
Rodent just had to have his done...04 and so did Bruizer recently think his was 04 also. Both were round 1200 or so. Don't know aout the ease of doing it ourself.
Re: Need New Compressor
Posted: Mon Aug 30, 2010 8:58 am
by NoCAL
Had it done to my '04 last year. It was $1200 at the old Galaxie Marine. Not too sure about DIY.
NoCAL
Re: Need New Compressor
Posted: Mon Aug 30, 2010 9:37 am
by fishinman
doityourself.com
Re: Need New Compressor
Posted: Mon Aug 30, 2010 2:08 pm
by Ally03 200xs
I replaced mine last year. It was pretty straight forward. Just make sure you label all your hoses. I also took about ten pictures with my digital camera at different angles.
Capital City Marine matched an online price I recieved. I don't THINK I paid over $800 for the part.
Here the steps I took to remove my compressor:
- Label Hoses
- Remove belt
- Remove hoses
- Remove nut(s) and bolts
- Remove compressor
- Remove pully and install on new compressor
You will now be ready to install the new compressor.
Feel free to email me at
xb03.200xs@gmail.com
Re: Need New Compressor
Posted: Mon Aug 30, 2010 2:16 pm
by bassman 209
I have a 06 opti and the compressor just went out 4 weeks ago, a good friend said take it to C & C in modesto they would treat me right. Well he was 100% correct, they did a great job and got me back on the water ASAP!!!!!! I was very pleased from the time i dropped my boat off and when I picked it up. I know for myself i will only go to C & C from now on.
Nevada
Re: Need New Compressor
Posted: Mon Aug 30, 2010 4:54 pm
by Joe Bruce
I had one break off at the mounts. welded, reinforced and epoxied it back together, ran fine for atleast a year that i know of
Re: Need New Compressor
Posted: Mon Aug 30, 2010 8:08 pm
by Ally03 200xs
Joe Bruce wrote:I had one break off at the mounts. welded, reinforced and epoxied it back together, ran fine for atleast a year that i know of
Mine also broke at the mounts...

Re: Need New Compressor
Posted: Tue Aug 31, 2010 11:57 pm
by Jim Moulton
Allyo3
Looks like a job for Joe Bruce

Re: Need New Compressor
Posted: Wed Sep 01, 2010 6:13 am
by XMAN
..ohh this will really make me want to buy an opti-blast...yikes