Page 1 of 1
Lowrance Carbon/Yamaha question
Posted: Sat Mar 24, 2018 8:25 am
by Charles
I recently upgraded to Carbons (12's). One of the precious software updates stated that a Yamaha link would show on the home screen. I can't seem to make this happen. I have the NEMA 2000 connected and show some of the gauges are active on the gauges screen. I do not have fuel, trim,, or water pressure. What do I need to do to find the Yamaha link and activate the other gauges?
Charles
Re: Lowrance Carbon/Yamaha question
Posted: Sun Mar 25, 2018 8:27 am
by wallyandre
Do you have the Lowrance-Yamaha cable part # 000-0120-37 ? Connect to your network
Re: Lowrance Carbon/Yamaha question
Posted: Fri Apr 20, 2018 3:05 pm
by Charles
Yes I do and still nothing other than some of the gauges are working on the gauges screen. The direct link advertised with the latest Carbon update is still missing.
Re: Lowrance Carbon/Yamaha question
Posted: Sat Apr 21, 2018 8:39 pm
by Marc
You will have to go into the menu options to go to the network, and select for each function (i.e. rpm, gps speed, etc.) that you want to select your engine for the source of that data.
Re: Lowrance Carbon/Yamaha question
Posted: Sat Apr 28, 2018 8:28 pm
by Ken Sauret
You will need to do what Marc said and then go to your Pages screen, hit the Edit at the bottom and when you place your choices in a new Page, choose the gauges option. Then you will have a Page that shows all the functions available from the Yamaha interface cable.