Page 1 of 1
Transducers
Posted: Mon Dec 27, 2010 10:45 am
by rxfish
Ken, I mounted a HDS-5 on the bow and used the transducer from my 520c and although I haven't been on the water with it everything seems to work. I want to mount the transducer for the structure scan on the trolling motor as well till I can get a better unit for the console at which time I will move it to the back. I think you mentioned doing this. I'm thinking you mount the transducer at the very bottom. Any issues with both transducers being that close?
Re: Transducers
Posted: Mon Dec 27, 2010 6:33 pm
by Ken Sauret
There is no problem mounting the 200 khz transducer you had on the LMS520c right behind the LSS-1 transducer. The different frequency's of each ducer don't interfere with each other at all.
Be sure to get the SS-TMB which is the trolling motor mount for the Structure Scan transducer. Here is the link:
http://www.lei-extras.com/store/search. ... r+Brackets
Re: Transducers
Posted: Tue Dec 28, 2010 5:06 am
by rxfish
Thanks Ken, I have the bracket ordered and with any luck I should be able to use it this weekend.
Re: Transducers
Posted: Tue Dec 28, 2010 4:14 pm
by Ken Sauret
You're gonna love what you can see to fish off to the side. Put the range on about 80 on the left/right scan to start with and have fun!