Page 1 of 1
Position flicker
Posted: Wed May 04, 2011 9:40 am
by Capt Al
I have an LCG4000 connected to an LCX113. At speeds over 5mph, the gps and mapping work like a charm. When I drop below 5mph and especially at trolling speeds, the position arrow will flicker to the left or right about every two or three position updates or changes. Anyone know what this is or what causes this?
Thanks,
Al
Re: Position flicker
Posted: Wed May 04, 2011 11:38 am
by Ken Sauret
The LCX 113c HD was originally designed to be paired with an LGC 3000 so when you connect a 4K to it at slower speeds the processor in the 113 has a little trouble keeping up with the speed of the new antenna. Benefits still outweigh the jittery icon at slow speeds I think.
Re: Position flicker
Posted: Wed May 04, 2011 12:25 pm
by Capt Al
Thanks for the info Ken. For a minute there, I thought I was getting interference from another electronic appliance.
Al
Re: Position flicker
Posted: Wed May 04, 2011 9:10 pm
by Marc
If you have not done so already, use the menu to go into the GPS settings and change the factory default from Auto to "Time" and then change the frequency block to "1 Second".
ciao,
Marc Marcantonio
Re: Position flicker
Posted: Tue May 10, 2011 2:30 pm
by Capt Al
Hmmm..I will give that a try. Thanks for the added info.
Al