Bass Fishing Forum - Westernbass.com

pb1967

The gear is being held at the Marine Patrol office. Call 925-427-8507 for inquiries.
The CCCSO Marine staff will be calling all known victims to set up viewing appointments in the very near future.

pb1967

Are more boats needed for this great event?

pb1967

Helm or bow unit? I have an x125 doing the same thing on my bow. I have obvious problems such as compromised sheathing on the transducer cable and one half of the transducer mount is broken. Check these on yours if on the bow. If it is a helm unit check to make sure the transducer is still mounted p...

pb1967

Price dropped to $100.00 OBO

pb1967

Lamiglas Skeet Reese SR 765R, 7'6", 8lb-20lb line rating; 1/4oz-1oz lure rated; power rating- 5. Great crank rod! Cork is slightly spoiled. Reel seat, guides and blank are all in great shape. No shipping. Local pickup or meet at Russo's preferred. $125.00 or best offer PM for phone number or pi...

pb1967

Shimano Crucial CRC-X711H, 7'11", 15lb-30lb mono/30lb-65lb braid rated; lure weight 3/8 - 1oz; power- heavy; action- extra fast. Cork is slightly spoiled. Reel seat, guides and blank are all in great shape. No shipping. Local pickup or meet at Russo's preferred. $125.00 or best offer PM for pho...

pb1967

I've cleared the Sunday schedule and I'll be there!!

pb1967

This is the most recent info I could find, but it is from 2009. Hopefully it helps.

http://home.comcast.net/~scy33613/banc.html

pb1967

TTT...

pb1967

No longer available. Thanks Westernbass!!

pb1967

Yes I do...

pb1967

Four wheel drive? Color? 4 doors or 2? Engine size?

Thanks

pb1967

I have a MinnKota MK-220 (two banks, 10 amps per bank) on board charger for sale. It is three years old and works just as if it was new. It has been mounted and used, but kept inside a garage or cover when the boat was not out fishing. I had just upgraded to a three bank and sold the boat so I no lo...

pb1967

I need a Navionics card for my Lowrance LMS 332. The card I need is part Number MSD/12XG-3.

Please let me know if you have one to sell.

Thanks

pb1967

Thank you.

pb1967

My mistake. The model is a LMS 332.

pb1967

The boat I just bought is equipped with a 322 unit at the helm. The mapping for the Delta is horrible. What chip do I need to wake this thing up?

Thanks

pb1967

Forgot to add Universal Sonar as well.

Thanks.

pb1967

Looking for what is listed in good shape, Will also consider a 36v Terrova with ipilot.

PM or email at fishwishin@comcast.net

Thanks

pb1967

I am looking for an older Shimano Curado 201 (left handed crank) with 3.8 gears. Must be in good to very good condition.
Thanks

pb1967

PM sent...

pb1967

I have a Pflueger President WLPL baitcast reel that is new in the box. This is the wide spool (30 more yards capacity), left handed version. I have three other Presidents that I love. I simply have new Curados that I am going to go with instead so this President will never see a rod mount. These typ...

pb1967

I have a Curado 201 that is showing a bit of wear and brittleness at the edge of three of the brake weights. I have spare new weights that came with a newly purchased Curado 301. Are the weights interchangeable (can I put the 301 weights on the 201)? Also, is there any difference in the different co...

pb1967

I am getting ready to spool up a Curado 301 with 65lb powerpro. How much mono. backing is considered sufficient?

Thanks

pb1967

I just picked a Curado 301E. I've not been paying much attention lately, but what is the difference between my new 301E and my 301D, aside from the color?

pb1967

Did you go back today??

pb1967

Can anybody say .38 snake shot!!

pb1967

I have just about all the rods I think I will need for this year except for a dedicated top water rod. I plan on throwing spooks and sammys. What characteristics should I look for in a TW rod? If you have any specific models I would appreciate that too. I am not looking for cheap rods, but not the m...

pb1967

Does anybody have any experience with Calcutta braided line, specifically the 65lb? I just bought some and thought I should have researched it beforehand. I have not spooled it on yet so I can take it back if need be.

Thanks

pb1967

I've seen lots of weird and nasty things before, but never that! Do you happen to know what happened?

pb1967

I caught my first two during Thanksgiving week. I was on the north side of West Island and they hit on rattle traps. They went 3 and 2 pounds respectively. Good fighters indeed!!! How much did that one weigh??

pb1967

5 MPH ALL THE WAY !!!!!!!!!!!!!!!!! +1 The developers are already having security guards tell fisherman they are trespassing in there, not true, but nonetheless... Lets not draw any negative attention to our sport in those areas. I also understand the new berms are kinda unsteady so the less exposu...

pb1967

I have the same set up as you do. I let my outboard charge my starting battery. My dual bank charger is attached to both of my trolling batteries, one bank on each battery.

pb1967

Sean Graf wrote:
sethook wrote:the shell station on tracy blvd in tracy...
Isn't that a 76 station?

Regardless, that must be one helluva gas station......

pb1967

I think I remember seeing a pre-rigged purple creme worm with prop and beads at Wal-Mart the other day. How would you fish those? Carolina?

pb1967

My F115 is almost three seasons old and has 115 hours on it. Today after fishing I noticed I have developed a leak somewhere in the power tilt/trim unit, but I can't tell where it's coming from. I am still under warranty so a repair should not be a problem, just a pain to haul it to the shop and lea...

pb1967

I would inquire more about the engine such as: how many total hours; maintainence records (if any); long periods of lay-up (not so good) or used on a regular basis (sometimes better). Is a trailer involved in the deal, if so consider its condition and what it may need as well.

pb1967

Craws and chromes for me.....

pb1967

ALL the bass boats that I saw in there yesterday came in and left on pad. It's a shame that some of us do not exercise common sense. I am hoping the opening stays open as I plan to take my son out there for some fun fishing. He needs to just catch a bunch of easy fish, not big ones, to keep him int...

pb1967

No, I did not leave. Only gave the appearance of it. I also believe that it is legal to go into, and fish, this body of water. The only wrench in the works that I can see is the fact that the housing developer also developed that system of levees, so they may have some say so in it for now, but if t...

pb1967

I went to Delta Cove today and worked the crankbaits for 11 schoolie stripers. This is the in-progress housing development, off of Sandmound Slough with lots of private docks. There are no structures, just lots of new waterways. As I was fishing a security guard got on the bull horn from the land an...

pb1967

Ron Hulligard (Biff on WB) does AWESOME work ! He is a full Machinest and Welder and did my work out of his house on Pecan Ln. H- 925-625-1579 C- 925-584-5644 If that doesn't work out the guys over at Brentwood Tire Co. hooked me up with some nice work for an axle replacement. The main guy there dr...

pb1967

This is not the first time I've heard people singing the praises of the everstarts. Why do they have such a loyal following?

pb1967

Ok guys, in order to fix my fried battery issue I went out and bought two new deep cycles today. I will wire brush, strip and neutralize once again all of the metal and paint in the battery holding area (see my other battery thread) this weekend, as well as prime and re-paint. Along with the batteri...

pb1967

Thanks for the replies guys. I did do the baking soda treatment and I pulled the batteries and trays out and did a very thorough rinse. I peeled out most of the affected paint, but not all of it. If my decking material is aluminum will I still need to prime it and cover it? My onboard charger is a M...

pb1967

Last night I was fueling the boat up and I started checking things out. I checked my deep cycle batteries to find that every single cell was way low on water and the inner caps had sooty residue on them. Further inspection showed that the water/acid came out so much that it overfilled the battery tr...

pb1967

I am looking for somebody to work on my Pflueger President baitcast reel. When I crank the handle hard and fast and then come to a sudden stop the spool has some over run (continues to spin) and is accompanied by a clicking sound. Anybody know what the problem is? And are there any reel techs. in th...

Search found 47 matches

Tags

Notice