Which Dobyn's Rod

rb · Post by rb » Mon Dec 17, 2007 3:02 am

We don't have any dealers here in the south but I'm looking for a jerkbait rod. Which one would be the best. Also will there be any at the Classic in Greenville SC

Mark Hiser · Post by **Mark Hiser** » Mon Dec 17, 2007 5:54 am

RB, actually there are a few dealers back there, but perhaps not where you are located. I have heard that Dobyns Rods will be at the Classic, and will be on display at the TackleWarehouse booth. I believe there will be several people there that can show you the different actions for jerkbaits. As far as the rods, for an all around jerkbait rod you might look at the 704CB or 705CB, these rods will cover most ripping needs, if your throwing the bigger baits alot, the 706CB is where you will want to go. All these rods retail at
$169.99 and in my opinion are a great value. If you would like, I can have someone back there contact you, if you PM me your contact info. Hope this helps, and you find the rod you need.

Mark Hiser

Phil · Post by **Phil** » Mon Dec 17, 2007 8:02 am

I AGREE WITH MARK.
THE 705CB WORKS GREAT FOR ME. I WILL MISS IT FOR AWHILE, I GAVE IT TO MY SON TO USE AT CLEARLAKE FOR AWHILE. ON DEMO ??? AS IF I WILL EVER GET IT BACK ONCE HE USES IT !!!

JIGS

Darkman · Post by **Darkman** » Mon Dec 17, 2007 10:38 am

Great recommendations, the Cb line is incredibly versatile, and as Gary Dobyns know a thing or two about ripping, you know the rods are Designed and made beautifully.

if you cant find one locally, try Tackle warehouse or another board sponsor...perhaps Jigs shop

Good luck

Gator · Post by **Gator** » Mon Dec 17, 2007 10:43 am

RB - PM sent

j-dogg · Post by **j-dogg** » Mon Dec 17, 2007 8:11 pm

705CB is my favorite by far for jerkbaiting. Tacklewarehouse does a great job w/ cust service and took care of me anytime I needed some help.

You'll be very happy w/ the 705cb.

Triton Mike · Post by **Triton Mike** » Tue Dec 18, 2007 12:13 am

rb, I will be with Dobyns Rods at Tacklewarehouse at the BASS Classic in February. Please stop by and introduce yourself and I'll be happy to go over the rods in detail with you.

"Triton" Mike Bucca
Acworth, GA

Gary Dobyns · Post by **Gary Dobyns** » Tue Dec 18, 2007 2:33 pm

Hi RB,

I think these guys covered it well. Mark Hiser is right on the money. If I can help let me know. Thanks.

Gary

rb · Post by rb » Wed Dec 19, 2007 4:00 am

Thanks to all new rod was ordered. I'll let you know how it works once it gets here. Its now jerkbait season. It was 80 degrees with
65 degree water temp last week, now it 31 degrees, sleeting and water temps at 48 degrees