Three new Z boats from Ranger!

[Jim Moulton]

Ranger is adding a new line of Z boats this year. The Z118, Z119, and the Z120.
These boats should be a big hit as they are going to be competitively priced.
Thanks Jim

Z118


Z119


Z120

[j10b]

Why dont they have Boats at ICAST? They dont right? They should if not

[tunaman]

Nice talking with you tonight Jim. Sounds like you've been extremely busy!

Looks like good things are happening in Flippin, and I like the new line and think they'll be winners given the current economic pressures.

Thanks also for the information on the new Minn Kota poles... sounds like they really did come out with a better mousetrap.

Lastly, congratulations to you for your acquisition of the 'new' C&C Marine - I'm sure it will be a great addition to your business family! Sounds like you've already put a lot of hard work into it, with much more to come, but hopefully it is all worth it in the end.

Hope to see you at the Pro-teen... very kind of you to try to find a way to squeeze it into your insane schedule!

Roger

[j10b]

If you think Minn kota is cool... Check out the Stern Stik. less then 2200 for 2 with wave compensation and remotes. Very impressive

[tunaman]

Nothing showed up in the first 100 links in Google, so they'd better get some press going...

Roger

[tunaman]

And nothing showing up with an explicit search for "stern stik"

[j10b]

http://www.tacklereports.com/wp/wp-cont ... rnstik.jpg

Deploys in 2 seconds, and that is a cutaway. Talked to the guy at the boat show in houston. There is a pic of the pump on that site too.

[XMAN]

Can i get the z190 for 30 grand or so..just flashers front and back, minnkota 24v, single axle, cover, temp gauge, 150 hp..we'll see how competively priced they are i hope..also must be red....X

[j10b]

They are at ICast this week, obviously. I know when they left Texas they were looking to find a partner interested carrying them so there are some benefits to being first.

Of course they may have someone this week. I can dig through my cards from that show if someone is interested.
No I didnt ask for a free pole. They just seem to have the best system that I want myself.

Its got a breakaway pin that is replaceable in 10 sec if something happens. So instead of the pole breaking the shear pin does.

Supposedly it will hold in 3 foot waves. Weighs under 25 pounds without the wave compensator and 36 with it. The pump is small and can be mounted horizontal or vertical.

The bracket is like 150 and comes with spacers. I am going to order one when I get some $$, Its a 30 min job maybe. Trim your motor down loosen both sides of the plate take one side off slide the bracket in. Tighten the bolts to snug take the other side off insert spacers. Line up and tighten all four Bolts.

There are like 4 wires if I remember right and its 2 little hoses to the pump. A simple clean install

[Brian D.]

mm...mm... purdy new botes. Maybe its time for a new one...

[Jim Moulton]

xman wrote
30 grand or so..
Yes we can!! give us a call you might be pleasently surprised