How to fix ROD GUIDES VIDEO

Post Reply
WB Staff
Posts: 13579
Joined: Thu Jan 26, 2012 10:56 am

How to fix ROD GUIDES VIDEO

Post by WB Staff »

Top
John Gallagher
Posts: 33
Joined: Sun Oct 14, 2007 4:38 pm

Re: How to fix ROD GUIDES VIDEO

Post by John Gallagher »

I’ll I can say is, “Getto Fabulous”
Top
AVG.JOE
Posts: 181
Joined: Tue Jul 31, 2018 3:06 pm

Re: How to fix ROD GUIDES VIDEO

Post by AVG.JOE »

I charge double after I have to fix this right/superglue is a bad idea on graphite- it is near impossible to get off a blank-it etches into blank and when removed often pulls fibers off of blank -potentially weakening the rod in that spot.
Custom rod builder/rod repair

Hook,Line and Sinker
2019/2020 A.O.Y
Top
gabuelhaj
Posts: 508
Joined: Sat May 07, 2005 8:21 am
Location: Manteca

Re: How to fix ROD GUIDES VIDEO

Post by gabuelhaj »

Seems like rescue tape could work here in a pinch?

Might need to carry some in the boat.

Thanks for the warning on the super glue.

Good luck!
Glenn Abuelhaj
Top
mark poulson
Posts: 10553
Joined: Sun May 08, 2005 4:16 am
Location: Antioch, CA

Re: How to fix ROD GUIDES VIDEO

Post by mark poulson »

AVG.JOE wrote:I charge double after I have to fix this right/superglue is a bad idea on graphite- it is near impossible to get off a blank-it etches into blank and when removed often pulls fibers off of blank -potentially weakening the rod in that spot.
How about duct tape and drywall screws? :wink:
Attitude plus effort equal success
CLEAN AND DRY
Top
Post Reply

Return to “Fishing”