MINN KOTA TROLLING MOTOR STOPPED WORKING

If it doesn't fit in any other forum, this is where it goes.
Post Reply
Stisubieb
Posts: 1
Joined: Tue Jul 16, 2019 1:51 pm

MINN KOTA TROLLING MOTOR STOPPED WORKING

Post by Stisubieb »

Hi guys. Newbie boat owner here. Took my 89 ranger out this weekend and the trolling motor suddenly quit working. I didnt hit anything or get tangled up. I have a few questions if anyone can guide me.

It's a 24v trolling motor. When I tested the wires behind the mom/off/con it reads 12v. Not sure if it should be 24v.

When I tested the speed controller wires I got 0. So assuming there is not power there that switch could need replaced. Also there is a 3rd switch or maybe a splitter connected between the speed controller and pedal switch. That didnt have power.

Both batteries readying 12v. (Yes they are hooked up correctly.) I have taken this boat out many times. First problem. All fuses are good.
Post Reply