Do I need a jack plate to add Minkota Talon

bass343 · Post by **bass343** » Mon Apr 29, 2013 8:16 pm

Do I need a jack plate to install a Minkota Talon on my boat? Or can I install one with out a jack plate?

Thanks

Dan

kraetzer · Post by **kraetzer** » Tue Apr 30, 2013 7:12 am

I think you use the "setback bracket" to install it straight to the transom. Mine is on the jackplate so I hope somebody with a transom mount can verify.

dwise · Post by **dwise** » Tue Apr 30, 2013 11:27 am

From the Minn Kota website

If you have technical questions about your Minn Kota product, you may also call us at 800-227-6433. You can reach us Monday-Friday between 7:00am and 4:30pm CST (in U.S. and Canada)

scottsweet · Post by **scottsweet** » Tue Apr 30, 2013 9:50 pm

I am on the Minn Kota pro-staff and no, you do not need a jack plate to install a Talon. However, you will need to remove your motor to install the talon mount so that it can be sandwiched between the transom and the motor. You will need to get a spacer for the other side if you decide to use only one Talon.

The new mount that is out is a universal mount and works on all boats. You can adjust the angles very easily. However, the old style mounts are still out if you choose.

Check it out at: http://store.minnkotamotors.com/products/623153/Talon_

Check out this document to help you understand more...http://store.minnkotamotors.com/media/d ... t_2013.pdf

I just installed the new mounts on my boat this past weekend...and the new Humminbird 360. The new mounts are quite nice and very easy to set up. My mounts did go on my jackplate through the existing holes of the older style mounts.

bass343 · Post by **bass343** » Tue Apr 30, 2013 10:34 pm

Thanks guys for the great info. Now, with that being said. What are the benefits of having a jackplate? Or should I install the Talon without a jackplate?

Dan

Bass Fishing Forum - Westernbass.com