Prop shop

Bill Brown Jr. · Post by **Bill Brown Jr.** » Wed Apr 11, 2007 2:48 pm

My prop has a few small dings on the leading edge of the blades and I am looking to have it repaired and possibly blueprinted. Does anyone know of a GOOD prop shop in the San Diego area that they would recommend.

John Barron · Post by **John Barron** » Thu Apr 12, 2007 5:07 am

Art will have a good prop shop 619-449-3474
jb

macinckirk · Post by **macinckirk** » Thu Apr 12, 2007 7:53 am

I need the same info but for the Victorville Area or some were close down the hill

Thanks Kirk

ko · Post by ko » Thu Apr 12, 2007 10:40 am

What does it cost to have a prop blueprinted and balanced? Does anyone know the approximate cost? Is it worth it, big difference?

Byron · Post by **Byron** » Thu Apr 12, 2007 12:06 pm

Go over to "Bass boat central" and contact Mark on the prop forums. His work is second to none, the man is a prop wizard. Extremely fast turnaround time. Just fill out his form complete and send it to him with the prop. You won't be dissapointed.
http://www.bassboatcentral.com/marksprops1.htm

macinckirk · Post by **macinckirk** » Thu Apr 12, 2007 2:03 pm

Byron wrote:Go over to "Bass boat central" and contact Mark on the prop forums. His work is second to none, the man is a prop wizard. Extremely fast turnaround time. Just fill out his form complete and send it to him with the prop. You won't be dissapointed.
http://www.bassboatcentral.com/marksprops1.htm

LMAO Thats my guy in Indiana He is the Best I just didn't what to wait till I go back but I think I may. I was hoping to find someone here that would be just as good and easyer to deal with

Thanks

B Becker · Post by **B Becker** » Fri Apr 13, 2007 6:26 am

KO,

It is usually around $150 to get a prop cleaned up and balanced.....the process is very time consuming that is why it cost so much....not really labor intensive, but the machine that polishes it up takes about 6 hours.......we have an awesome guy here in the Vegas area......I know that doesn't help you guys in Cali.....

Bill Brown Jr. · Post by **Bill Brown Jr.** » Mon Apr 16, 2007 7:42 am

On Bass Boat Central Mark's Propellers advertises blueprinting at about $175.00 for a 3 blade.

mike rooke · Post by **mike rooke** » Mon Apr 16, 2007 5:23 pm

gibbs propeller is by far the best shop around.there in lake havasu city its worth the extra time to ship it here.there #is 9284538000 mike rooke

Bill Brown Jr. · Post by **Bill Brown Jr.** » Mon Apr 16, 2007 8:28 pm

I am going to take it in to Propellers of San Diego. That is the same guy Angler's Marine uses and he is local. The charge for blueprinting is $200.00.

Thanks for all the input folks. Really appreciate it.