Post Havasu

Post Reply
DeltaBound
Posts: 793
Joined: Wed Jul 20, 2005 2:29 pm

Post Havasu

Post by DeltaBound »

What is the procedure for fishing DVL after Havasu? Quarentine? Is there a Quagga cleaning station at Havasu?
User avatar
Lynne
Posts: 1034
Joined: Tue Dec 13, 2005 5:57 pm
Location: Valley Center

Re: Post Havasu

Post by Lynne »

This was taken straight off the Diamond Valley Marina website www.dvmarina.com


This would pertain to Havasu:

ALL watercraft that have been in Quagga Mussel
infested water for less than 24 hours must:


All vessels used in a contaminated waterbody for less than 24 hours must remain out of any waterbody and dry for 7 consecutive days prior to launching at Diamond Valley Lake.
A list of contaminated lakes can be found by visiting http://www.dfg.ca.gov/invasives/quaggamussel/
Completely drain all water from the motor and standing water in the bilge, livewells, bait tanks, and internal ballast tanks in the watercraft. Draining the standing water is essential before leaving the infested waterbody.
Rinse the bilge, livewells, and bait tanks with hot (140 F) fresh water.
Flush the boat engine (especially stern drive boats) with hot (140 F) fresh water to kill veligers inside the engine cooling system. Check with engine manufacturers for warranty limitations.

Hope this helps,
Lynne
Guy Williams
Posts: 1965
Joined: Sat May 07, 2005 7:11 am
Location: Menifee

Re: Post Havasu

Post by Guy Williams »

Just enough time for us!!
Guy Williams
You know it's going to hell when the best rapper out there is white and the best golfer is black.
Charles Barkley
DeltaBound
Posts: 793
Joined: Wed Jul 20, 2005 2:29 pm

Re: Post Havasu

Post by DeltaBound »

:roll: And where would we get the hot water?

Thanks for the responses!
FRANKRIZZO
Posts: 70
Joined: Tue Aug 07, 2007 2:05 pm
Location: temecula

Re: Post Havasu

Post by FRANKRIZZO »

put a hose on your water heater!
just mend it!
User avatar
brushhogxxx
Posts: 124
Joined: Tue Jun 27, 2006 11:52 am
Location: Van Nuys

Hot Water

Post by brushhogxxx »

Try using the Hot Water connection for the washing machine. I use this way to fill up the spy.


Jim T
Post Reply