225 Opti bondo job?

Moderators: MKA, Caudawg

ppickerell
Posts: 203
Joined: Fri Dec 02, 2005 10:35 am
Location: Pleasanton
Contact:

225 Opti bondo job?

Postby ppickerell » Wed Mar 24, 2010 4:20 pm

I bought a 2 yr old 2002 Champion w 225 opti from Anglers marine about 5 yrs ago. Was some Havasu/Socal Pro's trade purportetdly "well cared for". Love the boat.

Had a small bump recently around Mandy and noticed a quarter sized paint chip on the leading edge of the bulb in the gearcase with a white spot and did not think much of it as boat runs great. Took it in for spring service at Boatmasters and they tell me the gearcase has been repaired and bondo'ed and the bondo has clogged the 4 cooling holes and recommended fix is a reman gearcase for $2300. I have had ZERO alarms for overheat and ran 70 days plus last year with ZERO issues so this patch job has been in place for 5 yrs. Anglers in Anaheim did not answer there phone and the mailbox is full so I need second opinion. Are there supposed to be holes in the front of the gearcase on a 2002 Opti or are they redundant? Anyone know the service# for Anglers Marine?
02 Champion 206 DC Elite
Bobber Lobber

Guy Williams
Posts: 1965
Joined: Sat May 07, 2005 7:11 am
Location: Menifee

Re: 225 Opti bondo job?

Postby Guy Williams » Wed Mar 24, 2010 4:38 pm

You know it's going to hell when the best rapper out there is white and the best golfer is black.
Charles Barkley

ppickerell
Posts: 203
Joined: Fri Dec 02, 2005 10:35 am
Location: Pleasanton
Contact:

Re: 225 Opti bondo job?

Postby ppickerell » Wed Mar 24, 2010 7:14 pm

Thanks for the contact name Guy
02 Champion 206 DC Elite

Bobber Lobber

Kevin
Posts: 1885
Joined: Sun May 15, 2005 10:52 pm

Re: 225 Opti bondo job?

Postby Kevin » Wed Mar 24, 2010 7:34 pm

No way the guys at Anglers Marine would have Bondo'ed your gearcase. They don't win the Mercury CSI award every year for doing hack jobs.

User avatar
DeltaDan
Posts: 2880
Joined: Fri Dec 08, 2006 7:56 pm
Location: Oakley, CA
Contact:

Re: 225 Opti bondo job?

Postby DeltaDan » Wed Mar 24, 2010 7:41 pm

If it is not broke ..... Don't fix it ! :wink:


A Bro took his boat to a shop in the very same area you took yours to that was flawless in running for a simple 2 year Service very recently .... +/- 2 to 4 hours on the water ~~ and it appears his compressor went out. :?
You know, we always called each other goodfellas. Like, you'd say to somebody: "You're gonna like this guy; he's all right. He's a goodfella. He's one of us." You understand? We were goodfellas, wiseguys.

Team LL (2006 ~ And Beyond !! )

User avatar
lunker punker
Posts: 410
Joined: Sun Nov 05, 2006 8:50 am
Location: LL SOUTH

Re: 225 Opti bondo job?

Postby lunker punker » Wed Mar 24, 2010 8:15 pm

Big baits,big fish,big smiles!!!!!

mark poulson
Posts: 10044
Joined: Sun May 08, 2005 4:16 am
Location: Antioch, CA

Re: 225 Opti bondo job?

Postby mark poulson » Thu Mar 25, 2010 5:39 am

Attitude plus effort equal success
CLEAN AND DRY

User avatar
TAP25
Posts: 136
Joined: Tue Mar 14, 2006 8:16 am
Location: Livermore, CA

Re: 225 Opti bondo job?

Postby TAP25 » Thu Mar 25, 2010 7:03 am


User avatar
Sacto John
Posts: 664
Joined: Mon May 09, 2005 10:15 am
Location: Citrus Heights

Re: 225 Opti bondo job?

Postby Sacto John » Thu Mar 25, 2010 7:15 am


User avatar
lunker punker
Posts: 410
Joined: Sun Nov 05, 2006 8:50 am
Location: LL SOUTH

Re: 225 Opti bondo job?

Postby lunker punker » Thu Mar 25, 2010 8:37 am

Big baits,big fish,big smiles!!!!!

User avatar
Sacto John
Posts: 664
Joined: Mon May 09, 2005 10:15 am
Location: Citrus Heights

Re: 225 Opti bondo job?

Postby Sacto John » Thu Mar 25, 2010 8:48 am


massbaster
Posts: 152
Joined: Wed Jun 15, 2005 10:54 pm
Location: hayward

Re: 225 Opti bondo job?

Postby massbaster » Thu Mar 25, 2010 9:19 am

Yes get a second opinion .. I was told two years ago my lower unit was blown and I needed a new one . It turned out to be a broken shifter cable. I was also told at the same time my power head was about to blow , this was two years ago and my boat runs good.

jamescaird
Posts: 130
Joined: Sun Jan 22, 2006 7:21 pm

Re: 225 Opti bondo job?

Postby jamescaird » Thu Mar 25, 2010 10:14 am


ppickerell
Posts: 203
Joined: Fri Dec 02, 2005 10:35 am
Location: Pleasanton
Contact:

Re: 225 Opti bondo job?

Postby ppickerell » Thu Mar 25, 2010 1:04 pm

Thank you all for your comments. I talked to Jordan today who was not quite sure if this boat had the newer style bulb case with the 4 holes up front or not. Records show that Anglers did not do any gear case repair. BM says they are not sure about the holes but there is definitely a bondo job.

Oh well, boat has run great for 5 yrs, what's a blown power head between friends.
02 Champion 206 DC Elite

Bobber Lobber

sker13
Posts: 383
Joined: Tue Jul 22, 2008 9:33 am
Location: Clovis, CA

Re: 225 Opti bondo job?

Postby sker13 » Thu Mar 25, 2010 1:29 pm

There's One, Sterling
Hardcore Bass Apparel
hcbass.com

bustout
Posts: 327
Joined: Tue Jul 05, 2005 7:41 am

JB weld is better !!! Re: 225 Opti bondo job?

Postby bustout » Thu Mar 25, 2010 1:55 pm



Return to “Fishing”

Who is online

Users browsing this forum: BASNFAN and 57 guests