Rigging Giant Tubes
-
StrictlyBiznuss
- Posts: 44
- Joined: Thu Jun 15, 2006 9:33 pm
- Location: Antioch, CA
Rigging Giant Tubes
Ok, so, I read in an article that when Ish Monroe rigs up one of his infamous giant tube baits he only puts the hook through one side of the plastic. Huh? Can someone please explain to me how in the heck you're supposed to do this?
Alex---------<* ((( ><
- Roboworm99
- Posts: 77
- Joined: Sat Jan 26, 2008 6:57 pm
Re: Rigging Giant Tubes
It's a tube ...so you put the hook in the tube and pop it out the top and one side.
-
StrictlyBiznuss
- Posts: 44
- Joined: Thu Jun 15, 2006 9:33 pm
- Location: Antioch, CA
Re: Rigging Giant Tubes
Try again...he Texas-rigs it with like a 10/0-12/0 EWG hook.
Alex---------<* ((( ><
Re: Rigging Giant Tubes
You start it like any other texas rig, but instead of going through the bottom and out the top, he rigs it kinda side-ways so it skin hooks through the side. That is what I got out of it. I'm not trying to hi-jack this thread, but Canyon Plastics makes a 10" tube now, this thing is a trip!! I wish I had water here to fish it...
Brent Becker
Sponsors:
www.brentbeckerfishing.com
www.skeeterboats.com
www.basspro.com
www.bassaholics.com
www.maxima-lines.com
Sponsors:
www.brentbeckerfishing.com
www.skeeterboats.com
www.basspro.com
www.bassaholics.com
www.maxima-lines.com
Re: Rigging Giant Tubes
The description sounds like texaposed rigging, but I would think being rigged off center would be undesirable.
2009 Bass tracker 175 TXW 60 hp
Lowrance HD7 with Lss-1.
Power Drive V2 70lb 24v Minnkota trolling Motor.
Lowrance HD7 with Lss-1.
Power Drive V2 70lb 24v Minnkota trolling Motor.
Re: Rigging Giant Tubes
Yeah, I guess it is more tx-posed, and I think he does it for sight fishing purposes. That is how I saw it rigged, I agree with the action though.
Brent Becker
Sponsors:
www.brentbeckerfishing.com
www.skeeterboats.com
www.basspro.com
www.bassaholics.com
www.maxima-lines.com
Sponsors:
www.brentbeckerfishing.com
www.skeeterboats.com
www.basspro.com
www.bassaholics.com
www.maxima-lines.com
-
FinesseKid
- Posts: 112
- Joined: Tue Dec 15, 2009 8:44 pm
- Location: Corona CA
Re: Rigging Giant Tubes
Yes, it seems it would be off center, but he probably skin hooks it so get an easier hookset while site fishing. I would prefer just using a big G-Lock worm hook and going all the way through the tube so it was still relatively weedless but still exposed on the texas rig.
-
brambo0311
- Posts: 1330
- Joined: Mon Apr 30, 2007 12:05 pm
- Contact:
Re: Rigging Giant Tubes
you have to be careful with that. Some tourney orgs have a 7/0 size restriction.StrictlyBiznuss wrote:Try again...he Texas-rigs it with like a 10/0-12/0 EWG hook.
Tie a few inches of braid on a 7/0 hook. Clip on a 1/2 ounce or whatever DS weight. Stick it inside the tube, pop it out one side and Texas rig. Pop out the hook eye and tie it on.
LL
Re: Rigging Giant Tubes
Where is Dan Wurm when you need him?
Blade Runner makes a good stand up jig head for giant Tora tubes that works good.
I like the Gamakatsu #2894 4/0 wide gap jig hook on a 1/2 oz football for 7" Tora tubes. Don't think this 4/0 hook isn't big enough, it's wider gap than a 7/0 worm hook and .056D forged wire, very strong.
Tom
Blade Runner makes a good stand up jig head for giant Tora tubes that works good.
I like the Gamakatsu #2894 4/0 wide gap jig hook on a 1/2 oz football for 7" Tora tubes. Don't think this 4/0 hook isn't big enough, it's wider gap than a 7/0 worm hook and .056D forged wire, very strong.
Tom
-
Micropterus salmoides
- Posts: 356
- Joined: Wed Nov 21, 2007 9:49 pm
Re: Rigging Giant Tubes
What size is the Mag G-Lock? Will it work as well or even better than the Picasso 12/0 Ish hook?
- BassManDan
- Posts: 1230
- Joined: Tue Jun 26, 2007 5:32 pm
- Location: Behind the Redwood Curtain
Re: Rigging Giant Tubes
I think the G-Mag is a size 7/0 or 8/0.
The Ish hook is just scary, I've got a couple sitting on the window sill next to me cause I can't figure out what to do with them
The Ish hook is just scary, I've got a couple sitting on the window sill next to me cause I can't figure out what to do with them
BassManDan - 1997 Stratos 295 Pro Elite
"In the spirit of akido, sh-sh-sh-shaaa."
-Dale Gribble from TV's "King of the Hill"
"It would be the best of all possible worlds were it not for religion."
- John Adams, 1776
"In the spirit of akido, sh-sh-sh-shaaa."
-Dale Gribble from TV's "King of the Hill"
"It would be the best of all possible worlds were it not for religion."
- John Adams, 1776
Copyright © 2013-2026 WesternBass.com ®


































Advertising