Curado E gear ratio

FSHRFWL · Post by **FSHRFWL** » Thu Mar 11, 2010 6:15 pm

Will the 200 ever come out in a 6.2-1 ratio? If not can one be converted? What parts and about how much? Thanks

bantam1 · Post by **bantam1** » Fri Mar 12, 2010 5:27 pm

No probably not. Yes it can be converted using the gear set from the Citica 200E. You will need the main and pinion gears, drag plate and drag washer. The parts are around $20-30. Labor is pretty easy to do yourself.

FSHRFWL · Post by **FSHRFWL** » Tue Aug 10, 2010 5:00 pm

Im getting ready to do this now. Can you give me the exact part numbers I would need? Where is the best place to purchase them? Thanks

bantam1 · Post by **bantam1** » Wed Aug 11, 2010 8:20 am

You can call us and order them direct. 877-577-0600.

FSHRFWL · Post by **FSHRFWL** » Thu Aug 19, 2010 12:30 pm

I got a little different answer when I called. They said you needed the drive gear, pinion gear and key washer? Im a little confused.
Thanks

bantam1 · Post by **bantam1** » Fri Aug 20, 2010 5:11 am

The drag plate can be called a key washer.

drew · Post by **drew** » Sun Aug 22, 2010 3:35 pm

When I did this swap I used the 7:1 key/drag washer. The counter bore in the drive gear in which the drag resides is the same diameter in both gears.

21farms · Post by **21farms** » Tue Oct 05, 2010 9:24 am

to put citica E200 gears into a curado E7, you will need:

BNT 3951 (main gear)
BNT 3953 (pinion gear)
BNT 2430 (key washer)

note: you can reuse the drag washer (BTN 2431) since they are the same

to put citica E200 gears into a curado E5, you will need:

BNT 3951 (main gear)
BNT 3953 (pinion gear)
BNT 2430 (key washer)
BNT 2431 (drag washer) (or, you can use a carbontex drag washer from smoothdrag instead...sweet!)

i have found the best prices are direct from shimano at 877-577-0600. shipping is $3 regardless of order size.