Ci4 2500 Handle Question

[dogfish2]

Is there any way to change the round grip on the handle to a paddle-type grip, like the Stradic handles? Thanks.

[DanIsaac]

would have to change the entire handle. Fobs will not interchange.

Dan

[bantam1]

I am pretty sure the knob from the Stradic 2500FI will bolt on.

[dogfish2]

Thanks, I'll try that option. Are there any tricks to taking the knob off?

[bantam1]

Unscrew the cap and you will see the screw holding the knob on the handle shank. Remove this screw and the knob should come right off. I recommend having the schematic there so you can see all the parts. It should be in the box that the reel came in.

[dogfish2]

Thanks, I appreciate the advice.

[dogfish2]

Bantam1,
Looking at the schematic of the Stradic 2500 MGFA, I see only the whole handle assembly. It doesn't indicate that you can get the knob as a separate part. Perhaps, I am missing something? Thanks.

[bantam1]

Look at the schematic for the FI model.

http://fish.shimano.com/media/fishing/S ... 640161.pdf

[Nitro640]

I hate the feel of the EVA round foam handle too, but luckily my Sustain 3000 (direct-drive) handle screws nicely into my 2500 Ci4. Depending on which reel I'm using I just switch the entire handle. My dealer told me a spare Sustain 3000 handle retails for around $50.00.

[bantam1]

You can use the Stradic 2500 or 3000FI handle on the CI4 if you want a lower price handle. The Stradic handle sells for $25.